Philips manuals, page 71
PHILIPS SAA4990H handbook
SAA4990H is an integrated circuit produced by Philips Semiconductors. It supports progressive scan conversion, field rate up-conversion, line flicker reduction, noise and cross-color reduction, variable vertical sample rate conversion, movie phase detection, synchronous No parity Eight bit Reception and Transmission (SNERT) interface.
PHILIPS SAA4981 handbook
This data sheet provides an overview of the features and characteristics of the SAA4981, including a fixed horizontal compression factor of 4/3, support for three fixed screen positions, a bandwidth of 5 MHz, a bypass function, inputs for luminance and chrominance of side panels, standard video inputs and outputs (Y, (B-Y) and (R-Y)), no processing of horizontal and vertical sync signals, and pre-filters and post-filters on chip
PHILIPS SAA4979H handbook
The SAA4979H is a sample rate converter with embedded high quality dynamic noise reduction and expansion port produced by Philips Semiconductors.
PHILIPS SAA4978H handbook
SAA4978H is a Picture Improved Combined Network (PICNIC) integrated circuit with 9-bit analog-to-digital conversion, automatic gain control, time base correction and sample rate conversion.
PHILIPS SAA4977H handbook
This document is a data sheet for the SAA4977H product produced by Philips Semiconductors. This product is an integrated circuit with an internal prefilter, clamp circuit, analog AGC, line locked PLL, triple YUV 8-bit analog-to-digital converter (ADC), horizontal compression, field rate up-converter (50 to 100 Hz or 60 to 120 Hz), 4:1:1 digital I/O interface, digital CTI (DCTI), digital luminance peaking, triple 10-bit digital-to-analog converter (DAC), memory controller, embedded microprocessor, 16 kB ROM, and 256 bytes of RAM.
PHILIPS SAA4974H handbook
This document is a specification sheet for Philips Semiconductors SAA4974H Besic without ADC. The product features the following characteristics: Field rate up-conversion (50 to 100 Hz or 60 to 120 Hz); 4:1:1 digital input; Digital Colour Transient Improvement (DCTI); Digital luminance peaking; Triple 10-bit Digital-to-Analog Converter (DAC); Memory control.
PHILIPS SAA4963 handbook
The SAA4963 is an alignment-free one chip comb filter compatible with NTSC M systems.
PHILIPS SAA4970T handbook
SAA4970T is an economical video processing IC (ECOBENDIC) with features such as digital horizontal PLL, digital CTI, digital luminance peaking, digital phase compensation filter, and D/A conversion.
PHILIPS SAA4960 handbook
The SAA4960 is an integrated PAL comb filter with adaptive function, compatible with PAL systems, and provides high performance in Y/C separation.
PHILIPS SAA4956TJ handbook
The SAA4956TJ is a 2.9-Mbit field memory with optional field-based noise reduction from Philips Semiconductors.
PHILIPS SAA4955TJ handbook
The SAA4955TJ is a 2.9-Mbit field memory designed for advanced TV applications such as 100/120 Hz TV, PALplus, PIP and 3D comb filter. Its features include: 2949264-bit field memory, 245772 × 12-bit organization, 3.3 V power supply, inputs fully TTL compatible when using an extra 5 V power supply, high speed read and write operations, FIFO operations, optional random access by block function, quasi static operation, write mask function, cascade operation possible, 16 Mbit CMOS DRAM process technology, 40-pin SOJ Package.
PHILIPS SAA4952WP handbook
This document is the specification sheet of SAA4952WP memory controller, including the features, performance indicators and application scenarios of the memory controller
PHILIPS SAA4951 handbook
The SAA4951 is a memory controller designed by Philips for high-end TVs using 2fH technology. The circuit provides all necessary write, read and clock pulses to control different field memory concepts. Furthermore, the drive signals for the horizontal and vertical deflection power stages are generated. The device is connected to a microcontroller via an 8-bit data bus. The controller receives commands via the I2C bus. Due to this fact the start and stop conditions of the main output control signals are programmable and the SAA4951 can be set in different function modes depending on the used TV-feature concept.
PHILIPS SAA4945H LIne MEmory noise Reduction IC (LIMERIC) handbook
The SAA4945H, LIMERIC (LIne MEmory noise Reduction IC) is a 2-D recursive noise reduction filter for both luminance and colour difference signals. The noise reduction is automatically adapted to the global noise level in the image. Ten different preferences of noise reduction can be set using a synchronous receiver transmitter bus; SNERT (Synchronous No parity Eight bit Receive Transmit) bus. Alternatively, the noise reduction can be switched off. The LIMERIC is generally placed directly after the ADC in the video chain.
PHILIPS SAA4700T VPS dataline processor handbook
SAA4700T is a bipolar integrated circuit designed for use in dataline receivers and incorporates a dataline slicer and decoder. The slicer extracts the dataline signal from the video signal and regenerates the data clock. It also provides signals for the decoder in order to decode the binary data that is transmitted in line 16 of every first field of the composite video signal (video programming signal and video recording programming by Teletext, VPS and VPT systems). The decoded information out of words 5 and 11 to 14 is accessed via the built-in I2C-bus interface. This information then can be used for programming a video cassette recorder in order to start and stop a recording of a television program at the correct aligned time, regardless of a delay or extension in the transmission time of the required program.