Philips manuals, page 245
PHILIPS BSN 400 L304 I Manual
The BSN 400 L304 I is a copper/iron construction impregnated (HID standard) inductive ballast suitable for use with HID light sources, in conjunction with an external trigger.
PHILIPS BSN 250 L427 ITS Manual
BSN 250 L427 ITS is a copper/iron construction dipped (HID standard) inductive ballast suitable for HID light sources, used in conjunction with an external trigger. The product features include: power factor correction, input current, power supply safety, power supply performance, output power, power factor compensation, power loss, connector type, maximum winding temperature, Delta-T normal condition, length, fixed hole distance length, width, height, fixed hole diameter, marking, ENEC certification certificate, CCC certification certificate, order code, complete product name, order product name, number of pieces per pack, packing configuration, number of packs per outer carton, bar code on the package, bar code on the outer carton, logistics code, net weight per piece.
PHILIPS CP 12BP28 Manual
This document introduces the CP 12BP28 capacitor, designed for power factor correction in HID lamp circuits. The capacitor is designed to improve the power factor of discharge light sources such as fluorescent lamps, halogen and ceramic metal halide lamps, high-pressure mercury lamps, and sodium lamps. It has a line voltage of 250V, a frequency of 50/60Hz, a capacitance of 12μF, and the output terminal of the connector type can be a plug-in connector, insulated wire, or flat quick connector. The operating temperature range is -40 to 85 degrees Celsius. The product complies with the GB18489-2001 and GB/T18504-2001 standards and has obtained VDE certification.
PHILIPS BSN 150 L302 ITS Manual
The document introduces the features and characteristics of the HID basic semi-serial ballast BSN 150 L302 ITS, which is suitable for SON/CDM/MH lamps and can be used in conjunction with an external trigger.
PHILIPS CP 25CU28 Guide
CP 25CU28 supplementary capacitor is an AC capacitor designed for single correction of power factor of transformers and magnetic ballasts inside discharge lighting sources, such as fluorescent lighting sources, halogen and ceramic metal halide lamps, high-pressure mercury lamps, and sodium lamps. It improves the power factor of the light source, so that the cosμ exceeds 0.85.
PHILIPS CP 30ET28 Manual
CP 30ET28 supplementary capacitor is an AC capacitor designed for the single correction of the power factor of transformers and magnetic ballasts within discharge lighting (such as fluorescent lamps, halogen and ceramic metal halide lamps, high pressure mercury lamps and sodium lamps) with a supply line frequency of 50 or 60Hz. This enhances the power factor of the light source, with cosμ exceeding 0.85.
PHILIPS SU 42-S HID The lamp circuit of the electronic Ignition Manual
This document provides product data for the electronic igniter SU 42-S, which is designed for HID lamp circuits. The igniter is specifically designed for Step Dim lighting systems and features a series trigger type. It operates at a line voltage of 220-230V with a frequency of 50/60Hz. The igniter has a power loss of 3W and a response voltage of 198V. It requires a screw WC connector type and a ballast contact of 0.50-2.50 mm2. The maximum housing temperature is 105°C and the ambient temperature is 75°C. The dimensions of the igniter are 96mm x 45mm x 34mm x 8mm. It is certified by ENEC and CB, and also has Chia quality certification.
PHILIPS HF-Regulator TD 324 TL5/PL-L EII 220-240V touch typeanddigital Addressable Lighting Interface Manual
HF-Regulator TD 324 TL5/PL-L EII 220-240V is a flat, lightweight high frequency electronic ballast that uses the DALI (Digital Addressable Lighting Interface) or touch dimming button protocol for PL-L5 fluorescent lamps.
PHILIPS HF-Regulator 249 TL5 EII 220-240V 50/60Hz TL5 Lights High-frequency regulator II Manual
HF-Regulator 249 TL5 EII 220-240V 50/60Hz is a high frequency regulator for TL5 lamps. It is a flat, ultra-thin, lightweight high frequency electronic ballast with an analog protocol of 1-10V, suitable for PL-L fluorescent lamps.
PHILIPS HID-DV LS-6 Xt 90 /S CPO-TW 220-240V CPO LumiStep Super HID- DynaVision Manual
The document provides product data and parameters for the LumiStep super strong HID-DynaVision HID-DV LS-6 Xt 90/S CPO-TW 220-240V CosmoWhite light source, including independent dimming and lightweight one-piece electronic ballast.
PHILIPS HF-Regulator 1 14-35 TL5 EII 220-240V 50/60Hz TL5 Lights High-frequency regulator II Manual
HF-Regulator 1 14-35 TL5 EII 220-240V 50/60Hz is a flat, ultra-thin, lightweight high-frequency electronic ballast for PL-L fluorescent lamps, with an analog protocol of 1-10V.
PHILIPS HF-Regulator 154 TL5 EII 220-240V 50/60Hz TL5 Lights High-frequency regulator II Manual
HF-Regulator 154 TL5 EII 220-240V 50/60Hz is a flat, ultra-thin, lightweight high-frequency electronic ballast with an analog protocol of 1-10V, suitable for PL-L fluorescent lamps.
PHILIPS HF-Regulator 136 PL-L EII 220-240V 50/60Hz PL-L Lights High-frequency regulator II Manual
HF-Regulator 136 PL-L EII 220-240V 50/60Hz is a flat, ultra-thin, lightweight high-frequency electronic ballast with an analog protocol of 1-10V for PL-L fluorescent lamps.
PHILIPS HF-Regulator 254 TL5 EII 220-240V 50/60Hz TL5 Lights High-frequency regulator II Manual
This document describes the features and characteristics of the HF-Regulator 254 TL5 EII 220-240V 50/60Hz, a high-frequency regulator suitable for TL5 and PL-L fluorescent lamps. It is flat, thin, and lightweight, and supports the 1-10V analog protocol.
PHILIPS HF-R TD 118 PL-T/C EII 220-240V 50/60Hz touch typeanddigital Addressable Lighting Interface Manual
HF-R TD 118 PL-T/C EII 220-240V 50/60Hz is a high-frequency electronic ballast from Philips. It is suitable for PL-T/C/R fluorescent lamps. The ballast supports DALI (digital addressable lighting interface) or touch dimming button protocol, and supports full digital input (power) and output (light source) management.