STMicroelectronics manuals, page 45
ST STG3220 handbook
The STG3220 is a high-speed CMOS low voltage dual analog SPDT (single pole dual throw) switch or 2:1 multiplexer/de-multiplexer switch fabricated in silicon gate C2MOS technology.
ST STHV748 handbook
The STHV748 is a single-chip, high-voltage, high-speed pulser generator from STMicroelectronics that is designed for medical ultrasound imaging applications. It has four independent channels and can generate output voltages up to ±90 V at frequencies up to 20 MHz.
ST STP16CPP05 handbook
STP16CPP05 is a low voltage, low current 16-bit constant current LED sink driver, featuring 16 constant current output channels, adjustable output current through external resistor, output current range of 3-40 mA, serial data in/parallel data out, etc.
ST STP16CPC05 handbook
The STP16CPC05 is a low voltage, low current power 16-bit shift register designed for LED panel displays. Its output current can be adjusted through an external resistor, and it supports 3.3V power supply.
ST STG4260 handbook
The STG4260 is a low voltage dual SPDT switch with a low resistance of 0.5Ω and 15 kV ESD protection. It operates in a wide voltage range and has a break-before-make feature.
ST ST3DV520 handbook
ST3DV520 is a 16- to 8-bit bidirectional multiplexer/demultiplexer low RON and high bandwidth switch suitable for analog video applications.
ST STMPS2242 STMPS2252 STMPS2262 STMPS2272 handbook
STMPS2242, STMPS2252 STMPS2262, STMPS2272 are enhanced dual-channel power switches with 100 mΩ high-side MOSFET switch, 500 mA/1000 mA continuous current/channel, thermal protection, independent short-circuit protection, overcurrent logic output, 2.7 V to 5.5 V operating range, CMOS and TTL compatible inputs, 2.5 ms typical rise time, undervoltage lockout, 13 µA maximum standby supply current, -40 °C to 85 °C ambient temperature range, 8 kV ESD protection, reverse current protection, fault blanking.
ST STG4160 handbook
STG4160 is a low voltage single SPDT switch with break-before-make feature and 15 kV contact ESD protection. It features a wide operating voltage range, low power dissipation, and low ON resistance.
ST STDVE103A handbook
STDVE103A is a digital video signal equalizer that is compatible with the HDMI v1.3 digital interface, has a data rate of 3.4 Gbps, a maximum clock speed of 340 MHz, and supports all deep color video formats. It can connect to cables up to 25 m long.
ST ST2349A handbook
The ST2349A is a 4-bit dual supply level translator that provides the level shifting capability to allow data transfer in a multi-voltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. It utilizes transmission gate-based design that allows bi-directional level translation without a control pin. The ST2349A accepts a VL from 1.65 to 3.6 V and VCC from 1.80 to 5.5 V, making it ideal for data transfer between low-voltage ASICs/PLD and higher voltage systems. This device has a tri-state output mode which can be used to disable all I/Os. The ST2349A supports power down mode when VCC is turned off.
ST ST2329A handbook
The ST2329A is a 2-bit dual supply level translator without direction control pin featuring 18 Mbps (max.) data rate, 1.65 to 3.6 V wide VL voltage range, 1.80 to 5.5 V wide VCC voltage range, power down mode feature, low quiescent current (max. 4 µA), 5.5 V tolerant enable pin, ESD performance on all pins of ±2 kV HBM and small package and footprint (QFN10 (1.8 x 1.4 mm) package). Applications include low voltage system level translation, mobile phones and other mobile devices, I2C level translation and UART level translation.
ST 74LX3G07 handbook
The 74LX3G07 is a low voltage CMOS triple buffer/driver manufactured by ST with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It features 5 V tolerant inputs, high speed, low power dissipation, power down protection on inputs and outputs, open drain output, 2000-V human body model ESD performance, 200-V machine model ESD performance and 1000-V charge device model ESD performance. It can be used in mobile phones and other applications.
ST STMUX1800L handbook
The STMUX1800L is a 16- to 8-bit multiplexer/demultiplexer low RON bidirectional LAN switch designed for various standards, such as 10/100/1000 Ethernet. It is designed for very low crosstalk, low bit-to-bit skew and low I/O capacitance.
ST STDVE001A handbook
The STDVE001A is an adaptive single 3.4 Gbps TMDS/HDMI signal equalizer that is compatible with the high-definition multimedia interface (HDMI) v1.3 digital interface and supports all video formats and maximum refresh rates for deep color.
ST STHDLS101T handbook
The STHDLS101T is a high-speed high-definition multimedia interface (HDMI) level shifter that converts low-swing AC coupled differential input to HDMI 1.3 compliant open-drain current steering RX-terminated differential output. Through the existing PCI-E pins in the graphics and memory controller hub (GMCH), it allows the use of a single power supply of 3.3 V.