STMicroelectronics Manuals

The 74LX1G14 is a low voltage CMOS single Schmitt inverter fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 5.5 VCC operations and low power and low noise applications. The internal circuit is composed of 3 stages including buffer output, which provide high noise immunity and stable output. Power down protection is provided on input and output and 0 to 7V can be accepted on inputs with no regard to the supply voltage. It can be interfaced to 5V signal environment for inputs in mixed 3.3/5V system. Pin configuration and function are the same as those of the 74LX1G04 but the 74LX1G14 has hysteresis. This together with its Schmitt trigger function allows it to be used on line receivers with slow rise/fall input signals. The input is equipped with protection circuits against static discharge, giving it ESD immunity and transient excess voltage.

The 74LX1G04 is a low voltage CMOS SINGLE INVERTER fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 5.5 VCC operations and low power and low noise applications.

HCF4081B is a quad 2-input AND gate, fabricated in CMOS technology, with medium speed operation, typical propagation delay time of 60ns (at 10V), power supply voltage range of -0.5 to +22V, static current of -200mA, input voltage range of -0.5 to VDD+0.5V, input current of ±10mA, and output current of 100mA.

The L6701 is a three-phase step-down controller with selectable VR9, VR10, and K8 DACs, 0.7% output voltage accuracy, adjustable reference offset, high-current integrated drivers, dynamic VID management, accurate fully-differential load-line current-sense, precise current-sharing and over-current protection, feedback disconnection protection, preliminary OV protection, 100kHz fixed oscillator, and SS_END/PGOOD signal.

The HCF4077B is an integrated circuit produced by Acer Semiconductor. It is fabricated in Metal Oxide Semiconductor technology and available in DIP and SOP packages. The HCF4077B contains four independent exclusive NOR gates. This device provides the system designer with a means for direct implementation of the exclusive-NOR. For applications as logical comparators, adders/ subtractors, parity generator and checkers.

HCF4056B is a 7-segment decoder driver for liquid crystal displays (LCDs). The device is fabricated using CMOS process and features ultra low power and high reliability. HCF4056B provides 1 input pin and 7 output pins.

用英文总结该文件内容，Describe the features and characteristics of the products in the document.

The HCF4053B is a low-on impedance, low-off leakage current, digitally controlled analog switch that can be used for multiplexing and demultiplexing. It has a low static current, high linearity and wide voltage range.

The HCF4556B is a dual 1 to 4 decoder/demultiplexer available in DIP and SOP packages. Each decoder has two select inputs (A and B), an Enable input (E), and four mutually exclusive outputs. On the HCF4556B the outputs are low on select. When the Enable input is high, the outputs is high regardless of the state of the select inputs A and B.

The HCF4040B is a 12-bit binary counter/divider from Honeywell with a working voltage range of 5V, 10V and 15V, a working frequency of 80ns, fully static operation, standardized symmetrical output characteristics, input leakage current of 100nA (maximum), 100% tested for static current.

HCF4020B is an integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. HCF4020B is a series of 14-stage shift registers which can be used as programmable counters or dividers.

The document describes the features and characteristics of the M74HCT4053 product, including low power dissipation, logic level translation, low on resistance, wide analog input voltage range, fast switching, etc.