STMicroelectronics Manuals

stg3699a is a high-performance low-voltage quad analog switch launched by st company, which has the characteristics of high switching speed, low on resistance and ultra-low power consumption. it is suitable for portable applications.

ST4G3234 is a low voltage CMOS four-bit bus buffer level translator produced by ST company. Its working voltage range is 1.4V to 3.6V, and the maximum timing delay is 4.4ns. The input and output current is 5µA.

The L7900 series is a three-terminal negative voltage regulator with an output current of up to 1.5A and several fixed output voltage options. It features thermal overload protection, short circuit protection, and output transition SOA protection. These regulators are useful in a wide range of applications and can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Additionally, they are particularly suited for split power supplies as they have the same voltage options as the L7800 positive standard series. The -5.2V option is also available for ECL systems. With adequate heat sinking, they can deliver over 1.5A of output current. Although primarily designed as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents.

The ST1G3234 is a dual supply low voltage CMOS 1-bit bus buffer level translator fabricated with sub-micron silicon gate and five-layer metal wiring C2MOS technology. Designed for use as an interface between a 3.3V bus and a 2.5V or 1.8V bus in a mixed 3.3V/1.8V, 3.3V/2.5V, 1.8V/1.4V and 2.5V/1.8V supply systems, it achieves high speed operation while maintaining the CMOS low power dissipation. This IC is intended for one-way asynchronous communication between data buses. The input and output power down protections disable the device

The ST16C32245 is a 14-bit dual supply bus transceiver produced by ST company. It uses C2MOS technology and supports 1.8V and 2.5V power supply. It has the characteristics of high speed and low power consumption.

The STM86312 is a VFD (Vacuum Fluorescent Display) controller/driver that features various display modes, key scanning, dimming circuit, high-voltage output, LED ports, and general-purpose input ports.

The document describes a high-speed CMOS octal D-type flip-flop with 3-state non-inverting outputs. The product features 5V tolerant inputs, high-speed operation, low power consumption, and strong anti-interference capabilities.

STPIC6C595 8-bit shift register is a low-voltage, low-current power driver with eight 100mA DMOS outputs.

This document describes a chip with high speed, low power consumption, TTL compatible inputs, and bidirectional parallel communication capabilities.

ST2378E is an 8-bit, dual supply, bi-directional level translator with ±15kV ESD protection, designed to interface data transfer between low-voltage ASICs/PLDs and higher voltage systems.

STG3699 is a high-speed CMOS low voltage quad analog single pole dual throw switch or 2:1 multiplexer/demultiplexer switch. It is designed for portable applications with a working voltage range of 1.65V to 4.3V, and features low ON-resistance, fast switching speed, and ultra-low power consumption.

M74HCT4051 is a single eight-channel analog MULTIPLEXER/DEMULTIPLEXER fabricated with silicon gate C2MOS technology. It contains 8 bidirectional and digitally controlled analog switches. It has an inhibit (INH) input terminal to disable all the switches when high, compatible with TTL output level.

The 74VCX1632245 is a dual supply low voltage CMOS 16-BIT BUS TRANSCEIVER fabricated with sub-micron silicon gate and five-layer metal wiring C2MOS technology. Designed for use as an interface between a 3.3V bus and a 2.5V or 1.8V bus in a mixed 3.3V/1.8V,3.3V/2.5V and 2.5V/ 1.8V supply systems, it achieves high speed operation while maintaining the CMOS low power dissipation. This IC is intended for two-way asynchronous communication between data buses and the direction of data transmission is determined by nDIR inputs. The enable inputs nG can be used to disable the device so that the buses are in high impedance state.

The ST L6732C is an adjustable step-down controller from ST with synchronous rectification function. Its features include: input voltage range from 1.8V to 14V; supply voltage range from 4.5V to 14V; adjustable output voltage down to 0.6V with ±0.8% accuracy over line voltage and temperature (0°C~125°C); fixed frequency voltage mode control; TON less than 100ns; 0% to 100% duty cycle; external input voltage reference; soft start and inhibit; high current embedded drivers; predictive anti-cross conduction control; programmable high-side and low-side RDSON sense over-current-protection; selectable switching frequency 250KHz/500KHz; pre-bias start up capability; power good output; master/slave synchronization with 180° phase shift; over voltage protection; thermal shut-down; package is HTSSOP16.