STMicroelectronics manuals, page 164
ST VNL5090N3-E VNL5090S5-E handbook
This datasheet provides detailed information on the VNL5090N3-E/VNL5090S5-E OMNIFET III fully protected low-side driver.
ST L99MM70XP handbook
l99mm70xp is an integrated microprocessor driven device intended for lin controlled exterior mirrors.
ST L9409 handbook
The L9409 is a monolithic multifunction alternator voltage regulator intended for use in automotive applications. The device regulates the output of an automotive generator by controlling the field winding current by means of either an analog fixed frequency PWM signal or digital fixed frequency PWM signal (LRC). The Load Response Control function is activated in order to eliminate IC engine speed fluctuation and vibrations caused by the insertion of sudden electrical loads during alternator low speed operations (f < 310 Hz). Both the analog and digital duty cycle are applied to a high side driver. The device is able to regulate the voltage either using a feedback signal from B pin or from S pin depending on the application needs. S pin is intended to have a clear direct connection with the positive terminal of the car battery. If this connection gets lost, the device will enter a failsafe mode and provide protection to the power system.
ST TDA7801 handbook
This is a digital input quad power amplifier with built-in diagnostics features
ST VND5T016ASP-E handbook
The VND5T016ASP-E is a product with double channel high side driver and analog current sense, designed for 24V automotive applications. It features very low standby current, compliance with European directive 2002/95/EC, fault reset standby pin, etc.
ST VND5T050AK-E handbook
The VND5T050AK-E is a monolithic device made using STMicroelectronics® VIPower® technology, intended for driving resistive or inductive loads with one side connected to ground.
ST TDA7391LV handbook
The TDA7391LV is a bridge class AB audio power amplifier specially intended for car radio high power applications. It combines high power output with the possibility to operate either in differential input mode or single ended input mode. It is moreover compliant to the most recent OEM specifications for low voltage operation (so called 'start-stop' battery profile during engine start-stop).
ST STPA001 handbook
This datasheet provides detailed information on the STPA001 4 x 50 W MOSFET quad bridge power amplifier, including its features, specifications, and applications.
ST L4954 handbook
L4954 is a quad output voltage regulator and a three output high side driver. The IC includes monitoring circuitry to warn the microprocessor of a low voltage condition: the LVWarn, output, sensing the slow dropping of STCAP pins voltage, gives the microprocessor time to store data. A reset output is generated at REG4’s decay. External protection must be provided for reverse battery protection.
ST VND600P-E handbook
The VND600P-E is a double channel high-side solid state relay with features including CMOS-compatible input, proportional load current sense, shorted load protection, undervoltage and overvoltage shutdown, overvoltage clamp, thermal shutdown, current limitation, protection against loss of ground and loss of VCC, very low standby power dissipation, and reverse battery protected.
ST VN5E006ASP-E handbook
VN5E006ASP-E is a single channel high-side driver with analog current sense and diagnostic functions for automotive applications.
ST VN5770AKP-E handbook
VN5770AKP-E is a high performance, low power, small-sized quad smart power solid state relay from STMicroelectronics. The product uses STMicroelectronics' industry-leading VIPower® technology, which has high voltage resistance, low power consumption, low electromagnetic interference and other advantages, meeting the strict requirements of automotive electronics applications.
ST VB525SP-E handbook
The VB525SP-E is a high voltage power integrated circuit made using the STMicroelectronics™ VIPower™ M1-3 technology, with Darlington and logic level compatible vertical current flow power driving circuit. The enable pin allows to externally block the switch when the input is on. A built-in protection circuit for coil current limiting and collector voltage clamping allows the device to be used as a smart, high voltage, high current interface in advanced electronic ignition systems. If the input signal from the microcontroller happens to remain high, the device protects itself against overheating by forcing collector current to smoothly decrease (low voltage clamp feature) to avoid undesired spark.
ST 74V2T14 handbook
74V2T14 is a high performance CMOS triple schmitt inverter with high speed, low power and high anti-interference ability
ST 74V2T132 handbook
74V2T132 is an advanced high-speed CMOS SINGLE 2-INPUT NAND GATE fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology.