National Manuals

The FPD87352CXA is an integrated FPD-Link™ + RSDS + TFT-LCD Timing Controller, suitable for TFT-LCD monitors and TVs. It has an RTC feature that improves the intra-gray level response time of an LCD panel, resulting in a dramatically improved motion picture image quality of video content displayed on the LCD panel.

The LMV341/LMV342/LMV344 are single, dual, and quad low voltage, low power Operational Amplifiers. They are designed specifically for low voltage portable applications. Other important product characteristics are low input bias current, rail-to-rail output, and wide temperature range.

The LM3590 series white LED driver is a white LED constant current driver capable of supplying up to 3 white LEDs connected in series with 20mA. This device operates over a wide 6V-12.6V input voltage range. The output can accomodate LEDs with a combined forward voltage of up to 11.5V, from a 12V input supply. The LED drive current is programmed by using an external resistor on the ISET pin. LED brightness can be linearly varied up to the programmed LED current by applying a Pulse Width Modulated (PWM) signal to the EN pin of the device. The LED output current of the LM3590 is tightly controlled over temperature and voltage. LED Current matching is guaranteed due to the series configuration of the LEDs. The series topology also simpli- fies the connection between the White LEDs in the display module and the LM3590 since only one connection is re- quired. The LM3590 typically draws only 50µA when operating in the no-load condition and draws less than 0.1µA when the de- vice is shut down. The LM3590 is available in a small 5-pin SOT23 package.

The LM22676 3A SIMPLE SWITCHER® is a step-down voltage regulator with precision enable function. It has a wide input voltage range of 4.5V to 42V and can output 5V or 1.285V. It has internal compensation voltage mode control, high stability, can use low ESR ceramic capacitors, and has 120mΩ N-channel MOSFET TO-263 THIN package and 100mΩ N-channel MOSFET PSOP-8 package. It has ±1.5% feedback reference accuracy and a switching clock frequency of 500kHz.

The ADC122S655 is a dual 12-bit, 200 kSPS to 500 kSPS simultaneous sampling Analog-to-Digital (A/D) converter. It utilizes a successive-approximation register architecture to maintain the differential nature of the analog inputs throughout the conversion process, providing excellent common-mode signal rejection. The ADC122S655 features an external reference voltage that can be adjusted from 1.0V to VA. Its serial data output is in binary 2's complement format and compatible with various standards such as SPI™, QSPI™, MICROWIRE™, and common DSP serial interfaces. The ADC122S655 operates from a single 5V analog supply and consumes typically 11 mW of power at 500 kSPS. In power-down mode, the power consumption reduces to 3 µW. With its differential input, low power consumption, and compact size, the ADC122S655 is well-suited for direct connection to sensors in motor control applications. It is designed to operate reliably over the industrial temperature range of -40°C to +105°C and clock rates of 6.4 MHz to 16 MHz.

DS92001 is a 3.3V B/LVDS-BLVDS buffer that accepts a BLVDS input signal and provides a BLVDS output signal. The device can accept LVPECL, CML as well as LVDS signals, and has TRI-STATE outputs, a receiver input threshold of less than ±100 mV, a propagation delay of 1.4 ns (typical), and very low jitter.

LM185-1.2/LM285-1.2/LM385-1.2 Micropower Voltage Reference Diodes

The LMH0356 is a 3Gbps HD/SD SDI Reclocker that supports a 4:1 input multiplexer and FR4 EQs. It complies with the SMPTE 424M, SMPTE 292M, and SMPTE 259M (C) standards and supports data rates of 270Mbps, 1.483Gbps, 1.485Gbps, 2.967Gbps, and 2.97Gbps. It also supports DVB-ASI operation at 270Mbps.

The LM4904 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1 watt of continuous average power to an 8Ω BTL load with less than 1% distortion (THD+N) from a 5VDC power supply. The LM4904 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement. It features a low-power consumption shutdown mode and an internal thermal shutdown protection mechanism.

The LM3524D is a pulse width modulator with ±1% precision 5V reference. The output drive transistor current carrying capability has been increased to 200 mA while reducing VCEsat and increasing VCE breakdown to 60V. The error-amp common mode voltage range has been increased to 5.5V to eliminate the need for a resistive divider from the 5V reference. In the LM3524D, the circuit bias line has been isolated from the shutdown pin. This prevents the oscillator pulse amplitude and frequency from being disturbed by shutdown. Additionally, at high frequencies (~300 kHz), the max. duty cycle per output has been improved to 44% compared to 35% max. duty cycle in other 3524s. In addition, the LM3524D can now be synchronized externally, through pin 3. A latch has also been added to insure one pulse per period even in noisy environments. The LM3524D includes double pulse suppression logic that insures when a shutdown condition is removed the state of the T-flip-flop will change only after the first clock pulse has arrived. This feature prevents the same output from being pulsed twice in a row, thus reducing the possibility of core saturation.

LM2794/LM2795 Current Regulated Switched Capacitor LED Supply with Analog and PWM Brightness Control

The LMV851/LMV852/LMV854 are National’s low power, CMOS input, EMI hardened operational amplifiers. They offer low input bias current, a wide temperature range of -40 °C to +125 °C and exceptional performance, making them robust general purpose parts. Additionally, the LMV851/LMV852/LMV854 are EMI hardened to minimize any interference so they are ideal for EMI sensitive applications. The unity gain stable LMV851/LMV852/LMV854 feature 8 MHz of bandwidth while consuming only 0.4 mA of current per channel. These parts also maintain stability for capacitive loads as large as 200 pF. The LMV851/LMV852/ LMV854 provide superior performance and economy in terms of power and space usage. This family of parts has a maximum input offset voltage of 1 mV, a rail-to-rail output stage and an input common-mode voltage range that includes ground. Over an operating supply range from 2.7V to 5.5V the LMV851/LMV852/LMV854 provide a CMRR of 92 dB, and a PSRR of 93 dB. The LMV851/LMV852/LMV854 are offered in the space saving 5-Pin SC70 package, the 8-Pin MSOP and the 14-Pin TSSOP package.

This datasheet provides detailed information on the LME49870, a high performance, high fidelity audio operational amplifier with low distortion, low noise, and high slew rate.

The LM3150 is a simple step-down power controller from National Semiconductor that can provide up to 12A of output current in a typical application. It features an adjustable output voltage down to 0.6V, an input voltage range of 6V-42V, and a switching frequency that can be adjusted up to 1MHz. The LM3150 uses a proprietary Emulated Ripple Mode (ERM) control that allows for the use of low ESR output capacitors, which reduces overall solution size and output voltage ripple.

LMK01000/LMK01010/LMK01020 is a high performance clock buffer, divider and distributor that provides an easy way to divide and distribute high performance clock signals throughout the system. The device provides best-in-class noise performance and is designed to be pin-to-pin and footprint compatible with LMK03000/LMK02000 family of precision clock conditioners. The LMK01000/LMK01010/LMK01020 family features two programmable clock inputs (CLKin0 and CLKin1) that allow the user to dynamically switch between different clock domains. Each device features 8 clock outputs with independently programmable dividers and delay adjustments. The outputs of the device can be easily synchronized by an external pin (SYNC*).