Industrial Manuals

STPS2H100 is a Schottky rectifier released by ST. Its main features are negligible switching losses, high junction temperature capability, low leakage current, good trade-off between leakage current and forward voltage drop, and specified avalanche capability. It is suitable for high-frequency miniature switched mode power supplies such as adapters and on-board DC/DC converters.

File format: PDF Size:124 KB

STPS1045B is a high voltage dual Schottky rectifier suited for switch mode power supplies and other power converters. It has negligible switching losses, low forward voltage drop, low capacitance, and high reverse avalanche surge capability.

File format: PDF Size:86 KB

STPS3L25S is a low drop power Schottky rectifier from STMicroelectronics. It features a very low forward voltage drop for less power dissipation, optimized conduction/reverse losses trade-off for the highest efficiency in applications, and high power surface mount miniature package. It is especially intended for use as an antiparallel diode on synchronous rectification freewheel MOSFET’s at the secondary of 3.3V SMPS and DC/DC units.

File format: PDF Size:54 KB

File format: PDF Size:0 KB

STPS8L30 is a low-drop power Schottky rectifier that features low drop forward voltage for less power dissipation and reduced heatsink; optimized conduction/reverse losses trade-off which leads to the highest yield in the application; high power surface mount miniature package; avalanche capability specified.

File format: PDF Size:94 KB

STPS20L15D/G is a low drop OR-ing power Schottky diode with a maximum rated forward current of 20 A, maximum reverse voltage of 15 V, and maximum forward voltage drop of 0.33 V. This device is packaged in TO-220AC or D2PAK and is specifically intended for use as an OR-ing diode in fault tolerant power supply equipments.

File format: PDF Size:89 KB

STPS120L15TV is a low drop OR-ing power Schottky diode produced by STMicroelectronics. Its average forward current is 60A, the reverse peak voltage is 15V, and the maximum forward voltage drop is 0.31V.

File format: PDF Size:144 KB

STPS2L25 is a low drop power Schottky rectifier released by ST. Its features are low forward voltage drop, low power consumption and high conversion efficiency. This device is suitable for switched mode power supplies and high frequency DC to DC converters. It is especially suitable for use in parallel with MOSFETs in synchronous rectification.

File format: PDF Size:117 KB

The STPS1L40 is a Schottky rectifier from STMicroelectronics that features very small conduction losses, negligible switching losses, low forward voltage drop, and surface mount miniature packages.

File format: PDF Size:129 KB

This document describes the features and characteristics of a low drop power Schottky rectifier, including repetitive peak reverse voltage, average forward current, peak reverse current, etc.

File format: PDF Size:72 KB

The BAT54 is a low voltage Schottky diode from ST with low conduction losses, low reverse losses, low forward and reverse recovery times, extremely fast switching speeds, and low capacitance characteristics.

File format: PDF Size:155 KB

STPS1H100 is a high voltage power Schottky rectifier from ST, with the following features: negligible switching losses, high junction temperature capability, low leakage current, good trade-off between leakage current and forward voltage drop, avalanche capability specified, ECOPACK2® halogen-free component (SMAflat)

File format: PDF Size:143 KB

This product is a high voltage power Schottky rectifier from ST. It is packaged in DPAK and IPAK and is designed for high frequency miniature switched mode power supplies such as adapters and on board DC to DC converters. Its features are negligible switching losses, high junction temperature capability, low leakage current, good trade-off between leakage current and forward voltage drop, and avalanche specification

File format: PDF Size:96 KB

The SBS-01T is a temperature sensor that can be used to measure the temperature of engines and other devices. It has a measurement range of -20℃ to 200℃. It can be connected to a Futaba transmitter and the temperature can be displayed via the S.BUS2 port.

File format: PDF Size:896 KB

STPS8H100 is a high voltage power Schottky rectifier from STMicroelectronics. It has the following features: 1. Negligible switching losses; 2. High junction temperature capability; 3. Low leakage current; 4. Good trade off between leakage current and forward voltage drop; 5. Insulated package: TO-220FPAC Insulating voltage = 2000 V DC Typical package capacitance = 12 pF; 6. Avalanche capability specified.

File format: PDF Size:128 KB

The document describes the features and characteristics of the STPS20H100C 100 V power Schottky rectifier. The product features negligible switching losses, high junction temperature capability, a good trade-off between leakage current and forward voltage drop, low leakage current, and avalanche capability.

File format: PDF Size:134 KB

This file is about STPS80H100TV type Schottky rectifier product information

File format: PDF Size:118 KB

The document describes a high voltage power Schottky rectifier designed for high frequency telecom and computer Switched Mode Power Supplies and other power converters. The product has negligible switching losses, high junction temperature capability, low leakage current, a good trade-off between leakage current and forward voltage drop, and is avalanche rated.

File format: PDF Size:118 KB

STTH2003 is a high frequency secondary rectifier product produced by ST.

File format: PDF Size:137 KB

STTH803D/G is a high frequency secondary rectifier diode from ST, suitable for Switch Mode Power Supply and high frequency DC/DC converters. It is packaged in TO-220AC or D2PAK and is specifically intended for secondary rectification.

File format: PDF Size:91 KB