Industrial Manuals

EC3A02T is an ultra-small (1006 size), thin (0.35 mm) leadless package field effect transistor that is ideal for use as an audio and telephone condenser microphone.

File format: PDF Size:48 KB

ECS-D479.5B is a SAW FILTER produced by ECS INC. INTERNATIONAL. The center frequency is 478.0~481.0 MHz, the insertion loss is 23 dB, the 3 dB bandwidth is 25.7~27.7 MHz, the spurious response is 0~750 MHz, the frequency stability is -25 to +85 °C -86 ppm/°C, the insulation resistance is 10V DC 1 MΩ, the input is 60Ω / 4.8 pF, the output is 260Ω / 3.1 pF, the operating temperature is -25 +85 °C, the storage temperature is -40 +85 °C.

File format: PDF Size:54 KB

The ECS-96SMF Series surface mount monolithic crystal filter from ECS provides low profile and versatile filtering options for applications such as mobile communication, UHF, and cordless telephones.

File format: PDF Size:65 KB

ECS-3X8,2X6,1X5 32.768 KHz tuning fork crystals are used as a clock source in communication equipment, measuring instruments, microprocessors and other time management applications. Their low power consumption makes these crystals ideal for portable equipment.

File format: PDF Size:233 KB

The document is about USBN9603/USBN9604, introducing its product features and characteristics.

File format: PDF Size:217 KB

File format: PDF Size:1710 KB

This document is a copyright notice.

File format: PDF Size:1710 KB

This document is about the USBN9602-28M product, which is a USB 3.2 Gen 2x2 Type-C to Type-C cable. It has a maximum data transfer rate of 10 Gbps and supports up to 20V/5A charging.

File format: PDF Size:1697 KB

USBN9602 is an integrated USB Node controller compatible with the USB Specification Versions 1.0 and 1.1, released by National Semiconductor Corporation in 1998. The controller integrates a USB transceiver, a 3.3V regulator, a media access controller, USB endpoint (EP) FIFOs, a versatile 8-bit parallel interface, MICROWIRE/PLUS™ interface and a clock generator. A total of seven FIFO buffers support the different USB messages: one bidirectional FIFO for the mandatory control endpoint EP0, and six FIFOs for an additional six unidirectional Endpoint Pipes to support USB interrupt, bulk and isochronous data transfers. The 8-bit parallel interface supports multiplexed and non-multiplexed style CPU address/data buses. A programmer can program endpoint FIFOs via the 8-bit parallel interface.

File format: PDF Size:1697 KB

The USBLC6-4SC6 is a monolithic Application Specific Discrete dedicated to ESD protection of high speed interfaces, such as USB2.0, Ethernet links and Video lines. Its very low line capacitance secures a high level of signal integrity without compromising in protecting sensitive chips against the most stringent characterized ESD strikes.

File format: PDF Size:151 KB

USBLC6-2 is a very low capacitance ESD protection device designed for protection of high speed interfaces such as USB2.0, Ethernet links and Video lines. Its very low line capacitance secures a high level of signal integrity without compromising in protection sensitive chips against the most stringent characterized ESD strikes.

File format: PDF Size:135 KB

USBDFxxW5 is a monolithic device with recommended line termination and ESD protection for USB downstream ports. It meets USB 1.1 standard and provides best EMI and ESD performance in a 50% smaller SOT323-5L package.

File format: PDF Size:149 KB

SMSC DS – USB97CFDC Rev. 12/15/2000 USB97CFDC USB Floppy Disk Controller is a USB floppy disk controller produced by SMSC. It supports 640K, 720K, 1.44M, 1.2M Windows 98 J, and 1.2M NEC DOS 6.x formats.

File format: PDF Size:144 KB

USB97C202 is a USB 2.0 ATA/ ATAPI controller from SMSC. The controller supports 2.5 volt low power core operation, 3.3 volt I/O, and is compatible with USB 2.0 specifications. It also supports USB Mass Storage Compliant Bootable BIOS.

File format: PDF Size:305 KB

The USB97C201 is a USB 2.0 ATA/ATAPI controller from SMSC. It supports USB 2.0 specifications and supports USB Mass Storage Compliant Bootable BIOS.

File format: PDF Size:293 KB

SMSC DS - USB97C100 is a multi-endpoint USB peripheral controller with high performance, complete USB 1.1 compatibility, high-speed capability, dynamic hardware allocation, and extended power management.

File format: PDF Size:429 KB

USB6Bx is a transient overvoltage protector designed to protect sensitive equipment, such as Universal Serial Bus ports, RS-423 interfaces, RS-485 interfaces, ISDN equipment, T1/E1 line cards, and HDSL/ADSL interfaces. The product features a full diode bridge with integrated clamping protection, a breakdown voltage of 6V, peak pulse power dissipation of 500W, and very low capacitance compatible with high data or signal rates.

File format: PDF Size:76 KB

USB6B1 is a 500 watt peak pulse power protection device from Microsemi that provides protection for USB I/O transceivers from electrostatic discharge (ESD), electrical fast transients (EFT), and secondary lighting effects.

File format: PDF Size:69 KB

MSC1535.PDF is a product manual for MSC company's 500 watt ESD TVS array

File format: PDF Size:92 KB

This is a PDF document certified with ISO 9001, which describes a product named MSC1536. It is a Transient Voltage Suppressor (TVS) array designed to provide protection at the board level for two unidirectional data or interface lines. It is capable of protecting against voltage transients caused by electrostatic discharge (ESD), electrical fast transients (EFT), and secondary lighting effects. The TVS array has a peak power rating of 500 watts for an 8/20µsec pulse and features ultra-low capacitance of 3 pF. It is suitable for protecting sensitive circuitry including TTL, CMOS DRAMs, SRAMs, HCMOS, HSIC microprocessors, Universal Serial Bus (USB), and I/O transceivers.

File format: PDF Size:93 KB