Industrial Manuals

The TSM101 is a voltage and current controller providing a more integrated solution in Switching Mode Power Supply application versus common standard ICs solution, with more functions widely used in power control in a single IC. This application note shows three basic configurations of the IC, to be used in the secondary side of any SMPS. Functions described are precise secondary voltage regulation, current limiting with foldback function, window detector with output feedback to opto-coupler or power good signal to CPU.

File format: PDF Size:58 KB

File format: PDF Size:0 KB

TSM101 is a linear battery charger for nickel-cadmium batteries. It can charge at 200mA or 60mA, depending on whether the charge control input is open or grounded.

File format: PDF Size:94 KB

File format: PDF Size:0 KB

L296 is a power switching regulator that can power microprocessors. The output voltage is 5.1V to 40V and the current is 4A

File format: PDF Size:1882 KB

This is an application note about boost circuit optimization parameters, which introduces the optimization parameters of boost circuit, including the value of input capacitor Ci, the current ripple in the boost inductor Lb, the parasitic capacitances of the boost inductor and power semiconductors, the operating frequency and also the frequency modulation technique.

File format: PDF Size:97 KB

This is an application note that details how to use the L4981A/B controller to build a 1500W 440V power factor correction preregulator. The application note covers the circuit design, component selection, and layout.

File format: PDF Size:36 KB

Describes the design of a high power factor switching preregulator

File format: PDF Size:781 KB

This application note introduces the low-cost UC3842 current-mode controller. UC3842 can achieve high performance and low cost.

File format: PDF Size:1188 KB

L296 and L4960 high power switching regulators can be used to realize multiple output power supplies. This note describes several practical circuits of this type.

File format: PDF Size:849 KB

This paper introduces the working principle and design method of PFC circuit in detail, and analyzes and discusses the input filtering problem of PFC circuit.

File format: PDF Size:410 KB

This document introduces the development of high-efficiency circuits using switched mode techniques, which offer space saving and cost reduction, particularly in the heatsink and output LC filter. A new technology called MULTIPOWER-BCD has been developed for these applications, allowing the integration of isolated power DMOS elements, bipolar transistors, and CMOS logic on the same chip. This technology is especially suitable for switch mode applications due to its high efficiency, fast switching speed, and no secondary breakdown of the power DMOS element. With MULTIPOWER-BCD, the L497X family has been implemented, which is a new series of fully integrated switching regulators suitable for DC-DC converters operating in Buck configuration. The family consists of five devices with different output current values (2A, 3.5A, 5A, 7A, 10A). The devices rated at 2A and 3.5A are assembled in Power Dip (16+2+2) package, while the others are assembled in the Multiwatt15 package. Each device integrates a DMOS output power stage, a control section, limiting current, and supervisor functions such as reset and power fail signal for microprocessor applications. The output voltage can be adjusted starting from the internal reference voltage.

File format: PDF Size:371 KB

This application note introduces L497XA series of high current switching regulator ICs, which exploit Multipower-BCD technology to achieve very high output currents with low power dissipation

File format: PDF Size:1547 KB

File format: PDF Size:0 KB

This manual provides detailed safety information, operating and maintenance procedures for safe and effective use of Mayekawa M series reciprocating compressor.

File format: PDF Size:4837 KB

This document provides color and accessory information for KX-TG6051/KX-TGA600, including different colors of the product and the corresponding accessories. The features of the product include multiple color options and various accessories.

File format: PDF Size:111 KB

This document is about the installation and operation instructions for the Dometic refrigerator models RM 2191 and RM 2193. The refrigerator is designed for mobile homes or recreational vehicles and can be powered by LP gas, 12V DC, or 120V AC. The document also provides child safety tips and warnings about gas leaks and flammable substances.

File format: PDF Size:250 KB

This document is a description of color and accessory information for KX-TG3021/KX-TG3031/KX-TG6021/KX-TGA300/KX-TGA600.

File format: PDF Size:105 KB

This is a WMF Prestolino coffee machine product information sheet, which introduces the coffee machine's size, power, interface and other information

File format: PDF Size:173 KB

The document describes a coffee machine/insulated urn suitable for medium to high volume coffee requirements in places such as hotels, restaurants, and canteens. The product features stainless steel construction, half and full brew options, a hot water tap, and easy operation. Different models are available.

File format: PDF Size:86 KB