Philips Board Manuals

The PBSS8110Z 100V, 1A NPN low VCEsat (BISS) transistor is a low VCEsat transistor with a SOT223 (SC-73) package. It features a SOT223 package, low collector-emitter saturation voltage VCEsat, high collector current capability IC and ICM, high efficiency, and is mainly used in automotive 42V power, telecom infrastructure, industrial, DC-to-DC converter, peripheral driver, low supply voltage applications (e.g. lamps and LEDs), and inductive load drivers (e.g. relays, buzzers and motors).

PBSS5160DS is a 60V, 1A PNP low VCEsat (BISS) transistor with low collector-emitter saturation voltage VCEsat, high collector current capability, high collector current gain (hFE) and high efficiency.

PBSS3515M is a 15 V, 0.5 A PNP low VCEsat (BISS) transistor produced by Philips Semiconductors

PBSS3515F is a 15V low VCEsat PNP transistor with low collector-emitter saturation voltage and high current capabilities. It is suitable for general purpose switching and muting, low frequency driver circuits, LCD backlighting, audio frequency general purpose amplifier applications, and battery driven equipment (mobile phones, video cameras and hand-held devices).

PBSS2540M is a 40V, 0.5A low voltage saturation NPN transistor with low collector-emitter saturation voltage VCEsat, high collector current capability IC and ICM, high efficiency leading to reduced heat generation and reduced printed-circuit board requirements. It is suitable for power management and peripheral driver applications.

This document describes the features and characteristics of the PBSS2540F, a 40V low VCEsat NPN transistor. It includes low collector-emitter saturation voltage, high current capability, improved thermal behavior due to flat leads, and enhanced performance over SOT23 general purpose transistors. Applications include general purpose switching and muting, low frequency driver circuits, audio frequency general purpose amplifier applications, and battery driven equipment (mobile phones, video cameras, hand-held devices).

The PBSS2515YPN is a 15V low VCEsat NPN/PNP transistor. It features low collector-emitter saturation voltage, high current capability, replaces two SC-70 packaged low VCEsat transistors on the same PCB area, reduces required PCB area, and reduces pick and place costs.

PBSS2515VPN is a low Vcesat NPN/PNP dual transistor produced by PHILIPS, with a feature of low power consumption (300mW), small package (1.6x1.2mm), and can be used in switching, driving, backlighting, audio amplification and other occasions.

PBSS2515M is a 15V, 0.5A NPN low VCEsat (BISS) transistor with low collector-emitter saturation voltage VCEsat, high collector current capability IC and ICM, high efficiency, reduced heat generation and reduced printed-circuit board requirements. Suitable for power management, peripheral driver and other applications.

This document describes the features and applications of the PBSS2515F 15V low VCEsat NPN transistor.

PBSS2515VS is a low VCEsat NPN double transistor produced by PHILIPS. It has 300mW total power dissipation, 1.6x1.2mm ultra thin package, excellent coplanarity, low collector-emitter saturation voltage, high current capability, improved thermal performance and flat lead.

The ISP1123 is a USB 1.1 compliant compound Universal Serial Bus (USB) hub device. It integrates a Serial Interface Engine (SIE), hub repeater, hub controller, USB data transceivers and a 3.3 V voltage regulator.

ISP1122 is a USB hub device from ISP company, supports 2 to 5 downstream ports, has low power consumption and can be powered by bus, self-powered or hybrid-powered

ISP1109 is a USB transceiver device that supports CEA−936−A, Mini-USB Analog Carkit Interface. It is fully compliant with Universal Serial Bus Specification Rev. 2.0. The ISP1109 can transmit and receive serial data at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. The ISP1109 is available in HVQFN32 package.

The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully compliant with the Universal Serial Bus Specification Rev. 1.1. They are ideal for portable electronics devices such as mobile phones, digital still cameras, Personal Digital Assistants (PDA) and Information Appliances (IA). They allow USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) with power supply voltages from 1.65 V to 3.6 V to interface with the physical layer of the Universal Serial Bus. They have an integrated 5 V to 3.3 V voltage regulator for direct powering via the USB supply VBUS. The ISP1105/1106/1107 range can be used as a USB device transceiver or a USB host transceiver. They can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates.