Chinese user manual for SHA-C(A), THZ-82(A) and SHA-B(A) water bath constant temperature oscillators, covering specifications, operation, temperature…
This is a Chinese user manual for the water bath constant temperature oscillator, also called a water bath thermostatic shaker. The manual describes it as a biochemical instrument that combines a temperature-controlled water bath with an oscillator, used in research, education and production for cultivating and preparing plant, biological, microbiological, genetic, viral, environmental and medical samples. Three models are listed in the specifications table: SHA-C(A) (reciprocating), THZ-82(A) (orbital) and SHA-B(A) (dual function).
The manual gives the technical specifications, then step-by-step operating instructions: placing the unit, loading culture bottles, filling the water tank, switching on, setting the temperature with the SET and ∧/∨ keys, selecting the timer and adjusting the speed. It also explains how to switch between reciprocating and orbital oscillation on the dual-function model, and ends with maintenance instructions, including a three-month inspection and adding grease to the bearings every six months. This manual is written in Chinese.
| Speed range | Start to 300 r/min |
|---|---|
| Temperature control range | Room temperature to 99.9 °C |
| Amplitude | 20 mm |
| Heating power | 1800 W |
| Bottle capacity | Test tubes ∅16×200; 100 ml × 15; 200 ml × 9 |
| Timer range | 0 to 120 min (or continuous) |
| Power supply | 220 V 50 Hz |
| Dimensions | 700 × 500 × 460 |
Press the SET key until the digits on the display start flashing, then use the ∧ or ∨ keys to set the desired temperature and press SET again to return to normal operation.
No. The manual prohibits using the heater when there is no water in the tank.
A periodic check should be made every three months for water drops, dirt, water quality and cleanliness in the tank, and for the fuse, control components and fastening screws.
On the dual-function water bath oscillator, move the switch to the 往复 (reciprocating) or 回旋 (orbital) position to select the oscillation mode.