Universal Robots UR3 user manual covering hardware installation, safety functions, electrical interfaces, PolyScope programming, settings and technical…
This is the Chinese-language user manual for the Universal Robots UR3 robot arm, published by Universal Robots A/S. It explains that the robot is a programmable arm made of extruded aluminum tubes and joints that moves a tool and communicates with other machines through electrical signals, and that it is programmed through the PolyScope interface. The manual is aimed at robot integrators with basic mechanical and electrical training.
The document is split into two parts: a hardware installation manual covering safety, safety-related functions and interfaces, transportation, mechanical and electrical interfaces, maintenance and repair, disposal, certification, warranty, stopping times and technical specifications; and a PolyScope manual covering safety configuration, starting to program, the screen editors, robot control, programming commands, and setup screens. A terminology index closes the manual. This manual is written in Chinese.
| Robot type | UR3 |
|---|---|
| Weight | 11 kg / 24.3 lb |
| Maximum payload | 3 kg / 6.6 lb |
| Reach | 500 mm / 19.7 in |
| Pose repeatability | ±0.1 mm / ±0.0039 in (4 mil), according to ISO 9283 |
| Degrees of freedom | 6 rotating joints |
| Footprint | Ø128 mm / 5.0 in |
| Control box dimensions | 462 mm × 418 mm × 268 mm / 18.2 in × 16.5 in × 10.6 in (W × H × D) |
| Control box I/O ports | 16 digital inputs, 16 digital outputs, 2 analog inputs, 2 analog outputs |
| Tool I/O ports | 2 digital inputs, 2 digital outputs, 2 analog inputs |
| Communication | TCP/IP 1000 Mbit; Modbus TCP and EtherNet/IP adapter, PROFINET |
| Noise | 70 dB(A) |
| IP rating | IP54 |
| Power supply | 100-240 VAC, 50-60 Hz |
| Ambient temperature | 0-50 °C |
The robot arrives in two boxes: one contains the robot arm, the other contains the control box with teach pendant, mounting brackets for the control box and teach pendant, a key to open the control box, a region-compatible power cord, a laser touch pen and this manual.
The maximum payload is 3 kg (6.6 lb).
Software updates can be installed from a USB flash drive by inserting the drive, searching for files, selecting a file and clicking update, then following the on-screen instructions.
The manual is divided into a hardware installation manual, covering mechanical and electrical installation, and a PolyScope manual, covering robot programming.