Ohaus hand-held scale models HH 120 and HH 320 operating manual covering battery installation, features, calibration, and specifications.
The Ohaus Hand-Held Scale Series Models HH 120 and HH 320 operate according to this Operating Manual. The HH 120 and HH 320 only differ in weighing capacity, so the content of this manual applies to both models unless otherwise specified.
The manual covers battery installation, general product features, four button keypad, calibration, accessories, specifications, declaration of conformity, and warranty information. It notes that calibration weights are not provided with the scale and gives cautions for operating temperature, clean environments, and loading items.
| Capacity | 120.0 x 0.1g for HH 120; 320.0 x 0.1g for HH 320 |
|---|---|
| Linearity | ±0.1g ±0.2g |
| Stabilization time | 3 seconds |
| Maximum overload | 150% of capacity |
| Auto shut-off | 5 minutes no activity |
| Optimum operating temperature | 64° to 77° F / 18° to 25° C |
Two AAA size alkaline batteries are provided. Keep the protective cover in place while installing batteries, and re-insert the battery cover after installing them.
Pressing and holding the Unit/Cal button starts the calibration process. The display should show CAL, and calibration weights are not provided with the scale.
If the applied load exceeds the capacity of the scale, an E will appear on the display and the load should be removed immediately. The scale will return to normal operation.