Chinese user manual for the NG-30, NG-60, NG-135, NG-200 and NG-340 digital torque wrenches, covering parts, specifications, settings and care.
This Chinese user manual describes the NG-30, NG-60, NG-135, NG-200 and NG-340 digital torque wrenches. It explains the main uses of the tool for bolt tightening and control in the automotive and machinery industries, and lists its functions: digital torque readout, clockwise and counterclockwise operation, peak-hold and real-time modes, a buzzer and LCD indication when the preset torque is reached, four engineering units, storage of 100 records and automatic shut-off after 5 minutes.
The manual names the parts of the wrench and gives a technical specification table across the five models, including maximum operating range, drive size, buzzer setting range and length. It then covers inserting the batteries, powering on and resetting, waking the wrench from sleep, low-voltage protection, the settings menu, real-time and peak-hold modes, maintenance and storage, battery handling and the standard accessories supplied. This manual is written in Chinese.
| Maximum operating range, NG-30 | 30 N.m / 22.12 ft.lb / 265.5 in.lb / 305.91 kgf.cm |
|---|---|
| Maximum operating range, NG-340 | 340 N.m / 250 ft.lb / 3009 in.lb / 3467.03 kgf.cm |
| Accuracy | Clockwise ±2%, counterclockwise ±2.5% (20–100% of maximum operating range) |
| Drive size | 1/4, 3/8, 1/2 inch (by model) |
| Units | N.m, in.lb, ft.lb, kgf.cm |
| Operating modes | Peak hold (P) / real-time (T) |
| Data storage capacity | 100 records |
| Battery | 2 × 1.5 V AA batteries |
| Operating temperature | -10 °C to 60 °C |
| Storage temperature | -20 °C to 70 °C |
| Humidity | Up to 90% non-condensing |
| Ratchet head | Bidirectional ratchet head, 36 teeth |
| Drop test height | 1 m |
Press the "C" key to switch the wrench on, then press "C" again to reset it before use.
It takes two 1.5 V AA (No. 5) batteries, placed in the battery box with the correct polarity.
To keep good accuracy, recalibration about once a year is recommended.
If the system detects a battery voltage below 2.2 V, the wrench cuts the power and switches off automatically.
No. Over-torque beyond 105% of the maximum torque range may cause damage or loss of accuracy.