Instruction manual for the Hioki 9320/9320-01 logic probe, covering inspection, safety, specifications, parts, and use.
The Hioki 9320/9320-01 is a logic probe with indicator. The 9320 connects to the logic input unit for 8800 series Memory HiCorders, while the 9320-01 connects to the 8807/08 MEMORY HiCORDER; the 9320 can be used with 8807/08 using the optional 9323 conversion cable. Each channel has a selector that switches input type between digital input and contact input.
The manual covers initial inspection, package contents, preliminary checks, maintenance and service, safety symbols, overvoltage categories, usage notes, specifications, parts names, and using method.
| Number of channels | 4 (common ground with main unit and between channels) |
|---|---|
| Input type | Digital input / Contact input; selectable per channel |
| Input resistance | Digital input: 1 MΩ ±5% (0 to +5 V), 500 kΩ or more (+5 to +50 V); Contact inputs: approx. 2 kΩ |
| Response time | Less than 500 ns |
| Maximum input voltage | 0 to +50 VDC |
| Operating temperature and humidity | 0 to 40°C (32 to 104°F), 80%RH (no condensation) |
| Storage temperature and humidity | -10 to 50°C (14 to 122°F), 90%RH (no condensation) |
| Operating environment | Altitude up to 2000 m (6562 ft.), indoors |
| Dimensions | Approx. 62 W x 94 H x 20 D mm (2.44 x 3.70 x 0.79 in.) |
| Connector cable length | Approx. 1500 mm (59 in.) |
| Probe tip cable length | Approx. 300 mm (11.8 in.) |
| Mass | Approx. 150 g (5.3 oz.) |
| Accessories | IC clip leads, alligator clip leads, carrying case, instruction manual |
| Applicable standards | Safety: EN 61010, pollution degree 2, overvoltage category I; EMC: EN 61326 Class A |
| Accuracy guarantee | One year at 23±5°C (73±9°F), 35 to 80%RH |
The package contains the 9320 or 9320-01 logic probe, IC clip leads, alligator clip leads, a carrying case, and an instruction manual.
Wipe it gently with a soft cloth moistened with water or mild detergent; do not use solvents such as benzene, alcohol, acetone, ether, ketones, thinners, or gasoline.
The maximum input voltage is 50 VDC.
The 9320 connects to the logic input unit for 8800 series Memory HiCorders, while the 9320-01 connects to the 8807/08 MEMORY HiCORDER; the 9320 can be used with 8807/08 using the optional 9323 conversion cable.