FTDI TTL-232R USB to TTL serial UART converter cables with FT232RQ, various connectors, 1.8 m length, and VCP/D2XX driver support.
FTDI TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating the FT232RQ USB to serial UART interface IC. They provide a fast, simple way to connect devices with a TTL level serial interface to USB, with connector options including 6-way SIL, 3.5 mm audio jack, 8-way keyed, and wire-ended versions.
Each cable is 1.8 m long, USB powered, and USB 2.0 full speed compatible, with data transfer rates from 300 baud to 3 Mbaud. The cables require FTDI USB drivers, available free from FTDI, for VCP or D2XX access, and are FCC, CE, and RoHS compliant except where noted.
| TTL voltage levels | +5 V and +3.3 V |
|---|---|
| Data transfer rate | 300 baud to 3 Mbaud |
| Cable length | 1.80 m (6 feet) |
| Operating temperature range | -40 C to +85 C |
| USB compatibility | USB 2.0 Full Speed compatible |
| UART interface | 7 or 8 data bits, 1 or 2 stop bits, odd/even/mark/space/no parity |
| 6-way connector signals | Tx, Rx, RTS#, CTS#, VCC, GND |
| 3-way audio jack signals | Tx, Rx, GND |
| 8-way keyed connector | For use with FTDI VDRIVE2 or VMUSIC2 modules |
| External logic power | +5 V or +3.3 V from USB port |
| Compliance | FCC, CE, and RoHS compliant (WE cables not yet FCC/CE tested) |
| FT232R features | 5 V CMOS drive outputs and 5 V safe TTL inputs |
The cables are available at TTL levels of +5 V and +3.3 V.
Each TTL-232R cable is 1.8 m long.
They support data transfer rates from 300 baud to 3 Mbaud at TTL levels.
The range is fully RoHS compliant and CE and FCC certified, except the WE cables have not yet completed FCC and CE testing.