FTDI Manuals - Manual Library

Key facts

Manuals: 14
Languages: EN
Last added: 2026-10-01

Featured FTDI manuals

FTDI FT2232H Mini Module USB Hi-Speed Evaluation Module Datasheet

Datasheet 13 pages · 783 KB · EN

The FT2232H Mini Module is a USB‑to‑serial/FIFO development board that uses the FT2232H USB Hi‑Speed two‑port bridge chip. It is intended for rapid integration of USB into existing designs and supports UART, JTAG, SPI, I²C and other synchronous serial protocols via its configurable channels. The module connects to a host PC through a standard USB Mini‑B connector and appears as two virtual COM ports or can be accessed directly with FTDI’s D2XX driver.

The document details the electrical connections, pin assignments, mechanical dimensions, and default EEPROM configuration. It also lists supported operating systems for the VCP and D2XX drivers, and provides the module’s power requirements, temperature range, and maximum bus current. Contact information for FTDI worldwide offices is included.

Covers: Introduction · Typical Applications · Driver Support · Features · Electrical Details · Mechanical Details

FTDI FT311D and FT312D Demo APK User Guide

User Manual 27 pages · 986 KB · EN

This guide explains how to load and run the FTDI demo APKs on Android devices and provides example applications for each supported interface of the FT311D and FT312D chips. It includes step‑by‑step instructions for installing the .apk, using UART loopback, GPIO, PWM, I2C and SPI demos, and configuring UART parameters.

The document also contains safety notices, contact information for FTDI worldwide offices, and references to the FT311D and FT312D data sheets. All hardware connections and software settings are described with figures and tables.

Covers: Introduction · Loading Examples onto Android · UART Loopback · UART Test · GPIO Demo · PWM Demo

FTDI FT600Q-FT601Q IC Datasheet

Datasheet 33 pages · 1.7 MB · EN

The FT600 and FT601 are USB 3.0 to FIFO bridge chips that support SuperSpeed (5 Gbps), High‑Speed (480 Mbps) and Full‑Speed (12 Mbps) transfers. They provide up to eight configurable endpoints, multi‑voltage I/O (1.8 V, 2.5 V, 3.3 V), a built‑in 16 kB FIFO buffer, and an internal 1.0 V LDO. Typical applications include upgrading legacy peripherals, USB 3.0 data acquisition, digital video cameras, and industrial imaging devices.

The document includes driver support (royalty‑free D3XX drivers for Windows, macOS, Linux), ordering information for QFN‑56 (16‑bit) and QFN‑76 (32‑bit) packages, USB compliance details, block diagrams, pin‑out tables, functional descriptions, device ratings, power‑configuration options, package dimensions, and contact information for FTDI worldwide.

Covers: Typical Applications · Driver Support · Ordering Information · Block Diagram · Device Pin Out · Function Description

Latest FTDI manuals

FTDI FT2232H Mini Module USB Hi-Speed Evaluation Module Datasheet
Datasheet 13 pages · 783 KB · EN
The FTDI FT2232H Mini Module USB Hi‑Speed Evaluation Module datasheet provides features, electrical and mechanical details, driver support, and specifications.
FTDI FT311D and FT312D Demo APK User Guide
User Manual 27 pages · 986 KB · EN
User guide for FTDI FT311D and FT312D demo Android applications, covering installation, interface demos, and configuration.
FTDI FT600Q-FT601Q IC Datasheet
Datasheet 33 pages · 1.7 MB · EN
The FTDI FT600Q‑FT601Q datasheet details specifications, pin‑out, and application information for the USB 3.0‑to‑FIFO bridge ICs.
FTDI Chip FT232BM USB UART Manual
FT232BM USB UART ( USB - Serial) I.C.
FTDI FT245BL USB FIFO ( USB - Parallel ) I.C. handbook
The FT245BL is the lead free version of the 2nd generation of FTDI’s popular USB FIFO I.C. This device not only adds extra functionality to its FT8U245AM predecessor and reduces external component count, but also maintains a high degree of pin compatibility with the original, making it easy to upgrade or cost reduce existing designs as well as increasing the potential for using the device in new application areas.
FTDI Vinculum VNC1L Embedded USB Host Controller I.C.
Vinculum VNC1L is the first of FTDI's Vinculum family of Embedded USB host controller integrated circuit devices
FTDI EVAL232R FT232RL USB to RS232 Evaluation Module Incorporating Clock Generator Output FTDIChip-ID Security Dongle
This document introduces the features and characteristics of the FT232RL USB to RS232 evaluation module.
FTDI UM232R USB handbook
UM232R is a new development module from FTDI, which integrates the external EEPROM, clock circuit and USB resistors onto the device, further simplifying USB to serial interface designs. It also adds two new functions compared with its predecessors, effectively making it a “3-in-1” chip for some application areas.
FTDI Chip UM245R USB-Parallel FIFO Development Module handbook
The UM245R is a development module which uses FTDI’s FT245RL, the latest device to be added to FTDI’s range of USB UART interface Integrated Circuit Devices. The FT245R is a USB to parallel FIFO interface, with the new FTDIChip-ID™ security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to parallel designs using the FT245R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device. The FT245R adds a new function compared with its predecessors, effectively making it a “2-in-1” chip for some application areas. A unique number (the FTDIChip-ID™) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied. The UM245R is supplied on a PCB which is designed to plug into a standard 15.0mm (0.6”) wide 24 pin DIP socket. All components used, including the FT232RL are Pb-free (RoHS compliant).
FTDI MM232R Mini USB- Serial UART Development Module Incorporating Clock Generator Output FTDIChip-ID Security Dongle
The MM232R is a USB-to-serial UART development module that incorporates clock generator output and FTDIChip-ID™ security dongle. It uses FTDI's FT232RQ chip, the latest device to be added to FTDI's range of USB UART interface Integrated Circuit Devices.
FTDI FT245R USB FIFO I.C. Incorporating FTDIChip-ID Security Dongle
The FT245R is a USB FIFO interface chip developed by Future Technology Devices International Ltd., and it incorporates the FTDIChip-ID™ security dongle feature. The chip integrates the external EEPROM, clock circuit, and USB resistors, simplifying USB to parallel FIFO interface designs. It supports asynchronous and synchronous bit bang interface modes. Compared with its predecessors, the FT245R adds a new function, making it a “2-in-1” chip for certain application areas. A unique number (the FTDIChip-ID™) is burnt into the device during manufacture and can be read over USB, serving as a security dongle to protect customer application software from being copied. The FT245R is available in Pb-free (RoHS compliant) compact 28-Lead SSOP and QFN-32 packages.
FTDI FT232R USB UART I.C. Incorporating Clock Generator Output FTDIChip-ID Security Dongle
The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID™ security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available.
FTDI Ltd DS_US232R-10(R-100) USB to RS232 Adapter cable Data Sheet
This document introduces the features and characteristics of FTDI USB-RS232 adaptor cables
FTDI Future Technology Devices International Ltd DB9-USB-RS232 Module Male Female Manual
This document provides information about the products and documentation of Future Technology Devices International Ltd (FTDI). The product is not intended for use in any medical appliance, device, or system in which the failure of the product might reasonably be expected to result in personal injury. The document provides preliminary information that may be subject to change without notice. The adaptation or reproduction of any part of the document without the prior written consent of the copyright holder is prohibited.