Multilingual Fleck 2910 water softener valve manual covering installation, 3200/3210/3220/3230 timer settings, troubleshooting and parts.
The Fleck 2910 manual begins with a French user manual and also lists English, German, Spanish and Italian sections. It describes the valve, gives general installation advice and commissioning instructions, and explains timer adjustment for the 3200, 3210, 3220 and 3230 timers. A troubleshooting table covers failure to regenerate, hard water, salt consumption, pressure loss, resin loss and iron in the softener.
Contents also include timer sections, upper and lower control heads, the valve body, 2-inch bronze and plastic meters, a meter cable kit, valve dimensions and wiring diagrams. This manual is written in French.
| Valve models | 2910/1600 and 2910/1710 |
|---|---|
| Voltage | 24 V / 50-60 Hz with transformer |
| Minimum pressure | 1.8 bar (20 PSI) |
| Maximum pressure | 8.5 bar |
| Maximum water temperature | 43°C |
A minimum pressure of 1.8 bar is required for correct regeneration.
The water temperature must not exceed 43°C.
On the 3200 timer, regeneration starts at 2 a.m. on the day set by the metal pin.
It uses 24 V at 50-60 Hz with a transformer.