Aqara SSM-U01 Single Switch Module T1 (With Neutral) quick start guide covering installation, wiring, app setup, and Zigbee 3.0 operation.
The Aqara Single Switch Module T1 (With Neutral) is a relay control module based on the Zigbee 3.0 wireless communication protocol. It can control the on/off status of lights, fans, and other devices, and works with an Aqara Hub for remote control, timing control, power detection, and power consumption statistics. The device is for indoor use only and requires a compatible Zigbee 3.0 hub.
Installation requires the main power switch to be off. Wiring connects L to live, N to neutral, L1 to the load, and S0/S1 to an external switch if used. The module is mounted inside a switch pattress or similar protective enclosure, and the antenna is fixed in place. Setup is done through the Aqara Home app by adding “Single Switch Module T1 (With Neutral)”.
| Model | SSM-U01 |
|---|---|
| Dimensions | 42.9 × 40 × 19.9 mm |
| Wireless Protocol | Zigbee 3.0 |
| Electrical Rating | 100-250VAC, Max.10A, 50/60Hz, Max 2500W (Resistive Load) |
| Operating Temperature | 0 – 35°C |
| Zigbee Operation Frequency | 2405-2480 MHz |
| Zigbee Maximum Output Power | ≤ 13 dBm |
Yes, this device requires a compatible Zigbee 3.0 hub.
Long press the button for 8 seconds to reset or connect to the network.
It means the Zigbee network is connecting.
No, this product is designed for indoor use only.