This file is the Aqara Hub M2 quick start guide
The Aqara Hub M2 is a smart home control center that connects over Wi-Fi or Ethernet and supports Aqara Zigbee accessories and IR remote control. This guide covers product introduction, installation location, wired and wireless setup, adding the hub and accessories, IR appliance control, factory reset, and indicator light meanings.
Specifications include model HM2-G01, dimensions, input power, wireless protocols, operating temperature and humidity, supported systems, and RF output details. The guide also contains FCC and IC compliance statements and HomeKit notice information.
| Model | HM2-G01 |
|---|---|
| Dimensions | φ100.5×30.75mm (φ3.95×1.21 in.) |
| Input Power | 5V 1A or 5V 2A |
| Wireless Protocol | Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Zigbee3.0 IEEE 802.15.4, BLE 5.0 |
| Operating Temperature | -5°C~+50°C (23°F~122°F) |
| Operating Humidity | 0%-95%RH, no condensation |
| Supported Systems | Android 6.0 or iOS 12.0 and above |
| Wi-Fi Operation Frequency | 2412-2472 MHz |
| Wi-Fi Maximum Output Power | < 20 dBm |
| Bluetooth Operation Frequency | 2402-2480 MHz |
| Bluetooth Maximum Output Power | < 13 dBm |
| Zigbee Operation Frequency | 2405-2480 MHz |
| Zigbee Maximum Output Power | < 13 dBm |
The hub should be 2-6 meters away from the router, and metal obstacles between the hub and the router or around the hub should be avoided.
Use a 5V-1A or 5V-2A adapter, purchased separately, with the USB power cable.
Quick press the button on the hub ten times.
Press the button on the hub for more than 10 seconds until the yellow/red light flashes quickly, then add it again.