This guide provides step‑by‑step instructions for installing HP ProCurve 2300 and 2500 switches, including site preparation, power connection, cable selection, and mounting options. It also covers console access, initial configuration, and basic network setup for both series.
Additional sections describe LED indicators, troubleshooting tips, firmware download procedures, and detailed technical specifications such as power requirements, environmental limits, and connector standards.
| Physical dimensions (W x D x H) | 44.2 cm x 20.5 cm x 4.4 cm |
|---|---|
| Weight | 2.8 kg (6.2 lbs) |
| Input voltage range | 100–127 V or 200–240 V, 50/60 Hz |
| Maximum current | 2.4 A (100‑127 V) / 1.2 A (200‑240 V) |
| Operating temperature range | 0 °C to 55 °C (32 °F to 131 °F) |
| Storage temperature range | -40 °C to 70 °C (-40 °F to 158 °F) |
| Relative humidity (non‑condensing) | 15 % to 95 % at 40 °C, 15 % to 90 % at 65 °C |
| Maximum altitude | 4.6 km (15,000 ft) |
The Fault LED is orange; it is off in normal operation and blinks when a fault occurs on the switch, a port, or the fan.
Category 3, 4, or 5 unshielded twisted‑pair for 10 Mbps and Category 5 unshielded or shielded twisted‑pair for 100 Mbps, up to 100 m.
The switches automatically adjust to any voltage between 100‑127 V or 200‑240 V, at 50 or 60 Hz.