TP UP-SH is a new type of line direct thermal printer. The whole machine is small, light in weight, low noise, high print quality and good reliability. It is suitable for printing receipts for electronic cash registers and electronic meters, as well as printing data and curves for medical instruments.
The TP UP‑SH is a compact line‑type direct thermal printer designed for electronic cash registers, billing machines and medical instruments. It offers high print quality, low noise, and reliable operation with a 57.5 mm paper width and 8 dots/mm density.
The manual covers system installation, power connection, serial and parallel interface wiring, paper loading, self‑test procedures, and the full ESC/POS command set for text, graphics and custom characters. This manual is written in Chinese.
| Paper width | 57.5 ± 0.5 mm |
|---|---|
| Point density | 8 dots/mm |
| Effective print width | 384 dots/line |
| Print speed | 9 characters/line sec |
| Data receive buffer | 10 KB |
| Power supply | DC 9 V, 2 A |
| Standby current | 100 mA |
| Average working current | 1.9 A |
| Maximum working current | 2.6 A |
| Dimensions (W×D×H) | 104 mm × 186 mm × 96 mm |
| Weight | 420 g (without paper roll) |
| Operating temperature | 0 ~ 50 °C |
| Relative humidity | 20 ~ 85 % RH |
Open the top cover, cut the paper end as shown in the diagram, insert it into the print head slot, and close the cover.
The printer provides a serial RS‑232C compatible interface and a parallel Centronics‑compatible interface.
It uses a DC 9 V, 2 A supply; standby current is 100 mA, average working current 1.9 A, and maximum 2.6 A.
Press and hold the SEL key while powering on; the printer will print a self‑test page showing version, interface, character sets and model.