The Dell Networking Instant W-IAP205H is a high-performance dual-radio wireless and wired Instant access point for hospitality and branch office deployments. This device combines high-performance wireless mobility with Gigabit wired local access to provide secure network access to dormitories, hotel rooms, classrooms, clinics, and multi-tenant environments.
This guide describes the installation and hardware of the Dell Networking Instant W-IAP205H dual-radio access point for hospitality and branch deployments. It covers package contents, the front and rear hardware views, LED behavior, the console port, Ethernet ports E0-E3, the USB port, the reset button and power options.
The document also lists pre-installation network requirements and the setup process order. It notes that the access point requires Dell Instant 4.2 or later and provides details on PoE input and output, the optional 48 V DC adapter, and LED status indications. This manual is written in Portuguese.
| Wireless operation | Dual radio: 2.4 GHz for 802.11n and 5 GHz for 802.11n/ac |
|---|---|
| Supported standards | IEEE 802.11a/b/g/n/ac |
| Ethernet ports | Four active Ethernet ports (E0-E3) |
| PoE input | PoE input on port E0 only |
| PoE output | PoE output on port E3 only |
| Maximum PoE output power | 10 W |
| USB port output | Up to 5 W |
| DC power connector | 48 V DC |
| Minimum software | Dell Instant 4.2 or later |
It accepts PoE on port E0 through an IEEE 802.3af/at source, or can be powered by an optional 48 V DC AC/DC adapter such as the AP-AC-48V36 sold separately.
Port E3 can supply a maximum of 10 W. If a device tries to exceed the 10 W limit, the port is temporarily disabled and is re-enabled automatically.
Power off the AP, press the button with a small pointed object, power it on while holding the button, and release it after the system LED blinks.
The access point requires Dell Instant 4.2 or later.