Dell PowerEdge VRTX system upgrades PowerEdge VRTX to support fault-tolerant shared PERC 8
This document provides detailed instructions to upgrade the Dell PowerEdge VRTX system from a single-controller configuration to a fault-tolerant Shared PERC 8 configuration. The process includes prerequisites, safety warnings, and firmware upgrade steps. The upgrade may take up to 6 hours and requires two Shared PERC 8 cards for redundancy. Critical steps include backing up data, updating firmware, installing hardware, and verifying the fault-tolerant state via CMC GUI.
The guide covers firmware requirements for CMC, Shared PERC 8, backplane expansion boards, and storage drives. It also includes procedures for updating drivers, powering down the system, installing new hardware, and reconfiguring storage after reboot. Safety warnings emphasize handling hardware carefully and ensuring proper ESD protection. This manual is written in Chinese.
| Firmware Version - Shared PERC 8 | 23.8.10-0059 |
|---|---|
| CMC Firmware Version | 1.30 .bin |
| Chassis Architecture Firmware Version | 1.30 .bin |
| Backplane Expansion Board Firmware Version | 1.02 .exe |
The entire upgrade process may take up to 6 hours.
You must back up all data on shared storage drives, check the upgrade kit contents, ensure the system has a supported OS, set up the management station, and verify that system and storage status are normal in CMC.