The Dell PowerEdge Express Flash PCIe SSD User's Guide provides information on the architecture, interface, features, specifications, installation, configuration, and management of the PCIe SSD.
The Dell PowerEdge Express Flash PCIe SSD is a PCIe 2.0 solid-state storage device for Dell PowerEdge systems that uses SLC or MLC NAND flash and is offered in 175 GB and 350 GB (SLC) or 700 GB (MLC) capacities. This guide, written for regulatory models UCEA-100 and UCEM-100, describes the PCIe expansion adapter card, which provides PCIe connections for up to four SSDs in rack and tower systems, and the PCIe modular expansion card, which supports up to two SSDs in modular systems. The document notes that the SSD cannot be used as a bootable device.
The guide covers PCIe interface details, performance, ordered hot swap, device health monitoring with SMART, write endurance and write protection, supported operating systems, and technical specifications. It then explains first-time setup, removing and installing the SSD and expansion cards, driver installation for Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server and VMware, configuration and management through the HII configuration utility and Dell OpenManage Server Administrator, and troubleshooting. This manual is written in Chinese.
| NAND Type | SLC: 175 GB and 350 GB; MLC: 700 GB |
|---|---|
| System Interface | PCIe 2.0 |
| Backplane Connector | Combination connector (SFF-8639) |
| Unformatted Capacity | 175 GB, 350 GB and 700 GB |
| Height | 66.80 mm |
| Width | 14.9 mm |
| Length | 97.25 mm |
| Bytes per Sector | 512 B |
| Bootable Device | No |
| Endurance, 175 GB SLC (total bytes written) | 12.5 PB |
| Endurance, 350 GB SLC (total bytes written) | 25 PB |
| Endurance, 700 GB MLC (total bytes written) | 10 PB |
| Offline Data Retention | Up to one year after reaching 100% of total bytes written |
No. The guide states that the PCIe SSD does not support being used as a bootable device.
It is available in 175 GB and 350 GB capacities with SLC NAND, and 700 GB with MLC NAND.
Yes. Ordered hot insertion, removal and exchange are supported when the SSD is installed in a supported Dell system running a supported operating system.
It enters Write Protect mode, in which only read operations can be performed on the device.