This document describes the best practices for deploying leaf-spine networks in the data center with Dell EMC Networking and Cisco Nexus multilayer switches.
This white paper provides step-by-step configuration examples for deploying leaf-spine network architectures in data centers. It covers both Layer 2 (switched) and Layer 3 (routed) topologies, utilizing Dell EMC Networking switches at the leaf and spine layers, with Cisco Nexus switches used as spines in specific examples to demonstrate interoperability.
The document details the hardware overview, including the Dell EMC Networking S3048-ON, S4048-ON, S6010-ON, and Z9100-ON switches. It explains design considerations, management networks, and protocols such as VLT, UFD, RSTP, BGP, OSPF, IS-IS, BFD, and ECMP. Four specific examples walk the reader through configuring and validating these topologies.
| S3048-ON Ports | forty-eight 1GbE Base-T ports and four 10GbE SFP+ ports |
|---|---|
| S4048-ON Ports | forty-eight 10GbE SFP+ ports and six 40GbE QSFP+ ports |
| S6010-ON Ports | thirty-two 40GbE QSFP+ ports |
| Z9100-ON Ports | thirty-two ports supporting 10/25/40/50/100GbE plus two 10GbE ports |
| Dell Switch OS | DNOS 9.11.2.0 P0 |
| Cisco Nexus 7000 OS | NX-OS 6.2(16) |
| Cisco Nexus 5600 OS | NX-OS 7.3(2)N1(1) |
In a leaf-spine architecture, the access layer is referred to as the leaf layer where servers and storage connect, while the aggregation and core layers are condensed into a single spine layer where every leaf switch connects to every spine switch.
Yes, the guide provides examples using Cisco Nexus 5600 or 7000 series switches as spines configured for interoperability with Dell EMC Networking leaf switches.