Key facts
- Brand
- Dell EMC
- Model
- Z9100-ON
- Category
- Other Electronics
- Documents
- 3
- Languages
- EN
- Last added
- 2026-10-01
Start here

Dell EMC Networking Leaf-Spine Deployment and Best Practices Guide
This white paper provides step-by-step configuration examples for deploying leaf-spine network architectures in data centers. It covers both Layer 2 (switched) and Layer 3 (routed) topologies, utilizing Dell EMC Networking switches at the leaf and spine layers, with Cisco Nexus switches used as spines in specific examples to demonstrate interoperability.
The document details the hardware overview, including the Dell EMC Networking S3048-ON, S4048-ON, S6010-ON, and Z9100-ON switches. It explains design considerations, management networks, and protocols such as VLT, UFD, RSTP, BGP, OSPF, IS-IS, BFD, and ECMP. Four specific examples walk the reader through configuring and validating these topologies.
Dell EMC Z9100-ON specifications
| Switching I/O bandwidth | 6.4 Tbps (full duplex) |
|---|---|
| Maximum power consumption | 605 Watts |
| Dimensions | 1 RU, 1.72"h × 17.1"w × 18"d |
| Weight | 22 lbs (9.98 kg) |
| Port density (100GbE) | Up to 32 ports of 100GbE (QSFP28) |
| Latency | Sub 500 ns |
All Dell EMC Z9100-ON documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What is the maximum switching I/O bandwidth?
The switch provides up to 6.4 Tbps of switching I/O bandwidth in full‑duplex mode.
How many hot‑swappable power supplies does the Z9100‑ON have?
It includes two hot‑swappable power supplies.
Which switches are used as leaf switches?
The Dell EMC S4048-ON is used as leaf switches.
From: Dell EMC S3048-ON S4048-ON Z9100-ON Isilon Front-End Deployment and Best Practices Guide
Which Isilon model is used in the examples?
The examples use the Isilon X210.
From: Dell EMC S3048-ON S4048-ON Z9100-ON Isilon Front-End Deployment and Best Practices Guide
What is a leaf-spine architecture?
In a leaf-spine architecture, the access layer is referred to as the leaf layer where servers and storage connect, while the aggregation and core layers are condensed into a single spine layer where every leaf switch connects to every spine switch.
From: Dell EMC Networking Leaf-Spine Deployment and Best Practices Guide
Can Cisco Nexus switches be used with Dell EMC switches in this guide?
Yes, the guide provides examples using Cisco Nexus 5600 or 7000 series switches as spines configured for interoperability with Dell EMC Networking leaf switches.
From: Dell EMC Networking Leaf-Spine Deployment and Best Practices Guide
