GM-702B CO gas sensor uses MEMS technology, with solid structure and high sensitivity to carbon monoxide; it features small size, low power consumption, high sensitivity, fast response and recovery, simple drive circuit, good stability and long service life. It is mainly used in household carbon monoxide gas leakage alarm, industrial carbon monoxide gas alarm and portable carbon monoxide gas detector.
The GM-702B is a MEMS carbon monoxide gas sensor from Winsen. It uses a micro-hotplate made on a silicon substrate with a metal oxide semiconductor sensing material whose conductivity changes with CO concentration. The document describes the sensor structure, pin connections, basic test circuit, and characteristic curves.
The manual lists technical specifications and applications in household CO leak alarms, industrial CO alarms, and portable CO detectors. It also covers preheating, calibration, long-term stability, handling precautions, soldering conditions, packaging, and RoHS compliance. This manual is written in Chinese.
| Product Model | GM-702B |
|---|---|
| Product Type | MEMS carbon monoxide gas sensor |
| Standard Package | Ceramic package |
| Detection Gas | Carbon monoxide |
| Detection Concentration | 5 ppm to 5000 ppm CO |
| Loop Voltage VC | ≤24 VDC |
| Heating Voltage VH | 2.5 V ±0.1 V AC or DC (high temperature); 0.5 V ±0.1 V AC or DC (low temperature) |
| Heating Resistance RH | 80 Ω ±20 Ω at room temperature |
| Heating Power PH | ≤50 mW |
| Sensitive Body Resistance RS | 1 kΩ to 30 kΩ in 150 ppm CO |
| Sensitivity | R0 in air / Rs in 150 ppm CO ≥ 3 |
| Standard Test Conditions | 20 °C ±2 °C; 55%RH ±5%RH |
| Reflow Soldering Temperature | 250 ±10 °C |
| Hand Soldering Temperature | ≤350 °C for ≤5 s |
The GM-702B detects carbon monoxide.
Its stated detection range is 5 ppm to 5000 ppm CO.
It should be preheated for at least 24 hours.
Hand soldering should be at ≤350 °C for ≤5 seconds.