This manual provides usage instructions, technical specifications, and handling precautions for the Winsen ME4-SO2 electrochemical sulfur dioxide gas sensor.
The document is a user manual for the Winsen ME4-SO2, an electrochemical gas sensor designed to detect sulfur dioxide (SO2) concentrations. It operates on the principle of potentiostatic electrolysis where current generated by oxidation-reduction reactions at the working and counter electrodes corresponds to the SO2 concentration.
The guide details key technical parameters such as a measurement range of 0-20ppm, a response time of less than 30 seconds, and an operating temperature range of -20°C to 50°C. It also includes information on cross-interference from other gases like hydrogen sulfide and carbon monoxide, along with specific installation and maintenance precautions. This manual is written in Chinese.
| Detected Gas | Sulfur Dioxide (SO2) |
|---|---|
| Measurement Range | 0~20ppm |
| Maximum Measurement Limit | 200ppm |
| Sensitivity | (0.8±0.2) µA/ppm |
| Resolution | 0.1ppm |
| Response Time (T90) | <=30S |
| Operating Temperature Range | -20℃~50℃ |
| Humidity Range | 15%~90%RH |
| Service Life | 2 years (in air) |
The manual recommends a load resistance of 10Ω.
The aging time must not be less than 48 hours before using the sensor.
Yes, at a concentration of 50ppm, it shows a response of less than 0.15.