MP-3722 Solar Charge Controller User Manual

The MP-3722 is a solar charge controller with 3-stage charge control, equalization charging mode (automatic or manual), 12V DC load terminal control mode, temperature sensor (optional) and over temperature protection.


MP-3722 Solar Charge Controller User Manual - cover page
Category
Charge Controller
Document type
User Manual
Language
English
Pages
12
File format
PDF
File size
1.9 MB
Published
05 November, 2023
Updated
05 November, 2023
MD5 checksum
7AB7852AADBA7F3E284D1656A7253210

About this manual

The MP-3722 PV Charge Controller is designed for use with 12V photovoltaic panels/systems and different types of 12V batteries, such as wet or sealed lead acid, lead calcium, and lead antimony batteries. It provides PWM charging with 3-stage charge control, overcharge and over-discharge protection, over-temperature protection, and an informative LCD display with LED indications.

The manual covers connection and installation, LED and LCD indications, dip-switch and button settings, charge control modes, equalization charging, DC load control, and optional temperature sensor and remote signal terminal features.

What's inside

  • Precautions and Specifications
  • Introduction
  • Control and Indicator
  • Installation and Indication
  • Connection
  • LED Indicator
  • LCD Display
  • The Dip Switch, Set-Buttons and Reset Button Functions
  • PV Charge Control Mode
  • Remote Signal Terminal (Optional)

Specifications

Battery voltage12V
Maximum PV panel open circuit voltage26V
Continuous load/charge current30A
Maximum charge current (5 mins)35A
Maximum load current (5 mins)35A
Operation current (no Load and no PV)15mA
Voltage across terminals (PV to Battery)1.2V
Voltage across terminals (Battery to Load)0.6V
Electronic BlockingYes
Battery reverse polarity protectionYes
Overcharge & Over-discharge protectionYes
Battery status LED indication5-State LED Indications
Charging status indication3-State LCD Display
Recommended wire size#10AWG
Weight0.48kg
Dimension (WxDxH)150 x 85 x 45 mm
Fuse40A
Operating ambient temperature-10 to 50 °C
Over temperature protectionYes
Battery charging float voltage settingAdjustable from 12.0-16.5V
Battery charging bulk voltage settingAdjustable from 12.0-16.5V
Low Voltage Disconnect (LVD)Adjustable from 8-16V
Low Voltage Reconnect (LVR)Adjustable from 8-16V

Frequently asked questions

What battery voltage is the MP-3722 designed for?

It is intended to be used with a battery supply of 12 VDC nominal voltage.

What wire size is recommended for the MP-3722?

The recommended wire size is #10AWG.

What are the factory preset bulk and float charge voltages?

The factory preset bulk voltage is 14.3V and the float voltage is 13.5V.

How often does automatic equalization charging occur?

When enabled, equalization charge occurs for 2 hours once every thirty days.

Download PDF (1.9 MB)

Also Manuals