JN-HV series MPPT high-voltage solar controller user manual, introduces the product's functions, installation instructions, operation instructions, equipment parameters, warranty commitments and other content
This is the product user manual for the JN-HV series MPPT high-voltage solar charge controller made by Anhui Jingneng Green Energy Co., Ltd. (安徽精能绿色能源有限公司). It opens with safety symbols and safety notices, then describes the product's features, interface definitions, installation, wiring and the recommended cable sizes.
The operation section explains the LED indicators, the SET, ESC, UP and DOWN keys, the segment LCD display and the setting procedures. Later chapters list device parameters, protection functions, troubleshooting, system maintenance, the warranty statement, installation dimensions and the packing list, including optional communication modules. This manual is written in Chinese.
| MPPT efficiency | Not less than 99% |
|---|---|
| Tracking efficiency | Not less than 99.5% |
| Efficiency gain over PWM | 15–20% higher |
| Charging method | Three-stage: MPPT – boost charge – float charge |
| Supported battery types | Lead-acid, ternary lithium, lithium iron phosphate and others |
| Communication | RS485, with protocol available; WIFI and GPRS modules optional |
| RS485 port supply pin | +12 VDC, 12 V/400 mA |
| Wait time before opening the enclosure after power-off | 5 minutes |
It is compatible with lead-acid batteries, ternary lithium batteries, lithium iron phosphate batteries and other types.
The tracking efficiency is not less than 99.5%, which the manual states is 15–20% better than a normal PWM algorithm.
In standby mode, press and hold the SET and DOWN keys together for 3 seconds and the system restores factory settings.
Close the battery switch first, then the PV switch; when shutting down, turn off PV first and then the battery switch.