This manual provides instructions for using the NCV8851B evaluation board. The board provides a convenient way to evaluate and integrate a complete high-efficiency synchronous buck converter design.
The NCV8851BDBGEVB is an onsemi evaluation board for the NCV8851B automotive grade synchronous buck controller. It is configured for a 5.0 V output at a 170 kHz switching frequency with a 4 A average current limit, and it accepts a dc input from 4.5 V to 40 V. The board requires dc supplies for input voltage and enable, and it can accept an external clock on SYNC for synchronization or spread spectrum operation.
The manual gives terminal descriptions, absolute maximum ratings, electrical characteristics, operational guidelines, typical waveforms and performance plots, a schematic and bill of materials. It also explains evaluation board modifications for connecting EN to a higher voltage, changing the switching frequency, synchronizing to a higher frequency, and adjusting the current limit.
| Output Voltage | 5.00 V |
|---|---|
| Switching Frequency | 170 kHz |
| Average Current Limit | 4 A |
| Input Voltage Range | 4.5 V to 40 V |
| Efficiency | 91% at 3 A |
| SYNC Frequency | 170 kHz to 600 kHz |
| Demo Board Ambient Temperature | -40°C to 105°C |
| Cycle-by-cycle Overcurrent Protection | 6.4 A |
It is configured for a 5.0 V output.
It accepts a dc input voltage from 4.5 V to 40 V.
By default, the switching frequency is set to 170 kHz using resistor RO1.
Yes; it can be adjusted by using a different sense resistor for RS1.