ADG5412/ADG5413 are high voltage latching type four-channel SPST switches with low on-resistance, high switching speed, no latch phenomenon, etc., suitable for relay alternatives, automatic test equipment, data acquisition, instrumentation, avionics, audio and video switches, communication systems and other applications
The ADG5412/ADG5413 are high voltage, latch-up immune analog switches containing four independent single-pole single-throw (SPST) switches. The ADG5412 turns on when the control input is logic 1; the ADG5413 has two switches with control logic similar to the ADG5412 and two with opposite logic. When on, each switch conducts equally in both directions and the input signal range extends to the supply voltages; when off, signal levels equal to the supply voltage are blocked. The devices have no VL pin, and their digital inputs are compatible with 3 V logic across the operating voltage range.
Key listed specifications include dual-supply operation from ±9 V to ±22 V, single-supply operation from 9 V to 40 V, a maximum rated supply voltage of 48 V, on resistance below 10 Ω, and an HBM ESD rating of 8 kV. Trench isolation is used to prevent latch-up. Listed applications include relay replacement, automatic test equipment, data acquisition, instrumentation, avionics, audio and video switching, and communications systems. This manual is written in Chinese.
| Switch configuration | Four independent SPST switches |
|---|---|
| Dual-supply range | ±9 V to ±22 V |
| Single-supply range | 9 V to 40 V |
| Maximum rated supply voltage | 48 V |
| On resistance | Less than 10 Ω |
| HBM ESD rating | 8 kV |
| VINH | 2.0 V minimum |
| VINL | 0.8 V maximum |
| −3 dB bandwidth | 167 MHz typical |
| Turn-on time (tON) | 170 ns typical |
| Turn-off time (tOFF) | 120 ns typical |
| Off isolation | −78 dB typical at 1 MHz |
The ADG5412 turns on when the related control input is logic 1. The ADG5413 has two switches with similar control logic and two with opposite logic, and it is a break-before-make switch.
The single-supply range is 9 V to 40 V.
Yes, the digital inputs are compatible with 3 V logic over the full operating voltage range.
The human body model ESD rating is 8 kV.