Texas Instruments UCC3895EVM-001 Direct Control Driven Synchronous Rectifier Evaluation Module User's Guide

This application guide describes how to use the UCC3895 in a direct control driven synchronous rectification application. The guide provides an overview of the features of the UCC3895EVM-001 evaluation module (EVM), and includes the schematics, component list, assembly drawing, artwork, and test setup required to evaluate the UCC3895 in a typical control driven synchronous rectification application.


Texas Instruments UCC3895EVM-001 Direct Control Driven Synchronous Rectifier Evaluation Module User's Guide - cover page
Brand
Texas Instruments
Category
DC/DC Converter
Document type
User Manual
Language
English
Pages
20
File format
PDF
File size
1.2 MB
Published
26 October, 2023
Updated
26 October, 2023
MD5 checksum
B61747D903AA2C1C58C830475AED42D1

About this manual

The UCC3895EVM-001 evaluation module is an isolated 48-V input phase-shifted full-bridge converter that provides a 3.3-V output at 15 A. The OUTA and OUTB outputs of the UCC3895 are used for direct control driven synchronous rectification, with no demodulation of the AB phase-shift clock signals.

This user's guide provides the schematic, component list, assembly drawing, artwork and test setup needed to evaluate the UCC3895 in a typical control-driven synchronous rectification application. It also presents ZVS measured data and an efficiency-versus-output-power plot for the EVM.

What's inside

  • Introduction
  • Features
  • Description
  • Schematic Description
  • Circuit Performance
  • UCC3895EVM-001 ZVS Measured Data

Specifications

Input voltage48 V typical, 36 V to 72 V
Output voltage3.3 V at 15 A DC
Isolation1500 V input to output
Dimensions3.5 x 2.5 x 0.5 in
Oscillator frequency400 kHz oscillator; 200 kHz operating
Efficiency87%
Control methodPeak current-mode control

Frequently asked questions

What input voltage range does the UCC3895EVM-001 accept?

It has a 48-V typical input and a 2:1 input range of 36 V to 72 V.

What is the UCC3895EVM-001 output rating?

The EVM provides a 3.3-V output at 15 A DC.

How is the synchronous rectifier gate drive isolated from the primary side?

OUTA and OUTB pass through T3, a signal transformer, before driving the secondary-side UCC27424 MOSFET driver.

What oscillator and operating frequencies does the EVM use?

It uses a 400-kHz oscillator frequency and a 200-kHz operating frequency.

Download PDF (1.2 MB)

More Texas Instruments Manuals


View all Texas Instruments manuals →