Thermo Fisher Scientific pH 5+, pH 6+ and Ion 6+ Meters Instruction Manual

This document is the instruction manual of the pH 5+, pH 6+ and Ion 6+ meters produced by Thermo Fisher Scientific. It introduces the use of the meters, including how to operate the meters, how to connect the electrodes and temperature sensors, how to calibrate the meters, and how to measure.


Thermo Fisher Scientific pH 5+, pH 6+ and Ion 6+ Meters Instruction Manual - cover page
Brand
Thermo Fisher Scientific
Category
Health Care
Document type
User Manual
Language
English
Pages
28
File format
PDF
File size
1 MB
Published
18 October, 2023
Updated
18 October, 2023
MD5 checksum
07135B5674DA40E958E877291294ECFB

About this manual

This manual provides instructions for using the pH 5+, pH 6+ and Ion 6+ meters, including setup, calibration, measurement, and electrode care. It covers pH, mV, and temperature measurements, with specific procedures for each model. The manual also includes troubleshooting and specifications for all devices.

The meters are handheld, microprocessor-based instruments with large LCD displays. The pH 5+ measures pH and temperature, while the pH 6+ and Ion 6+ measure pH, mV, and temperature. The Ion 6+ can also measure ion concentrations. All models use 4 alkaline AAA batteries and include a rubber armor/stand for protection.

What's inside

  • Introduction
  • Getting Started
  • Calibration
  • Measurement
  • Electrode Care and Maintenance
  • Troubleshooting
  • Specifications
  • Replacements and Accessories
  • Warranty
  • Return of Items

Specifications

pH Range0.00 to 14.00 pH
pH Resolution0.01 pH
pH Accuracy+/- 0.01 pH
Temperature Range0.0 to 100.0 oC
Temperature Resolution0.1 oC
Temperature Accuracy+/- 0.5 oC
Millivolt Range (Ion 6+)-500 to 500 mV
Millivolt Resolution (Ion 6+)0.1 mV for –200 to 200 mV; 1 mV for 200 to 500 mV
Millivolt Accuracy (Ion 6+)+/- 0.2 and 2 mV resp.
Operating Temperature0 to 50 oC
Battery Type4 x "AAA" Alkaline Batteries
Battery Life500 hours
Meter Dimensions15.7 x 8.5 x 4.2 cm
Meter Weight255 g

Frequently asked questions

What are the measurement modes for the pH 5+ and pH 6+ meters?

The pH 5+ measures pH and temperature (oC). The pH 6+ measures pH, mV (ORP), and temperature.

How do I calibrate the meter?

Calibrate using pH buffer standards (USA, NIST, or Pb groups) and follow the step-by-step procedure in Section 3.1. Calibration values are automatically saved.

What is the battery life of the meters?

The battery life is 500 hours with 4 x "AAA" alkaline batteries.

How do I condition the pH electrode before use?

Soak the electrode in pH 4 buffer solution for at least 1 hour, then rinse with clean water before use.

Download PDF (1 MB)

More Thermo Fisher Scientific Manuals


View all Thermo Fisher Scientific manuals →