This document is the user manual for the catalytic combustion gas sensor (model: MC106B) manufactured by Zhengzhou Winsen Electronic Technology Co., Ltd. The sensor operates based on the principle of catalytic combustion effect and has features such as linear output, fast response, good repeatability, and strong anti-interference performance. It is mainly used for combustible gas leakage alarm or concentration detection. The document also provides information on the technical specifications, sensitivity, and response recovery characteristics of the sensor.
This manual describes the Winsen MC106B catalytic combustion gas sensor, which operates based on the catalytic combustion effect. The sensor consists of a detection element and a compensation element paired to form one arm of a bridge circuit. When exposed to combustible gases, the resistance of the detection element increases, causing a proportional change in the bridge output voltage. The compensation element provides reference and temperature/humidity compensation. This manual is written in Chinese.
| Working Voltage | 2.5±0.1 V |
|---|---|
| Working Current | 150±10 mA |
| Sensitivity (1% Methane) | 15~45 mV |
| Sensitivity (1% Propane) | 25~65 mV |
| Measurement Range | 0~100 %LEL |
| Response Time (90%) | ≤10s |
| Recovery Time (90%) | ≤30s |
| Operating Temperature | -40℃~+70℃ |
| Storage Temperature | -20℃~+70℃ |
It is suitable for detecting combustible gases such as natural gas, liquefied gas, and coal gas in non-industrial public places.
The standard operating voltage is 2.5V with a tolerance of ±0.1V.
If stored for a long period (one year), the sensor requires 48 hours of aging to stabilize.
Use rosin flux with the least chlorine, a constant temperature soldering iron, a temperature not exceeding 350℃, and a time not exceeding 5 seconds.