This document is about the instructions for using the 75A ESC, which is a direct replacement for the DuraTrax® DX450 motorcycle. The ESC uses sensorless brushless technology and has an input voltage range of 7.2V-12V, suitable for NiCd/NiMH/LiPo batteries. During installation, the mounting surface should be cleaned and the ESC should be installed on the motorcycle's ESC mounting plate using double-sided tape. During setup, the transmitter's throttle trim should be set to neutral, and then the transmitter and ESC should be switched on. The ESC will sound to confirm its operation and the compatibility of the TX/RX. Once the second set of beeps is heard, driving can begin.
This manual provides instructions for the DuraTrax DX450, a 1/18 scale radio-controlled dirt bike. It details the required tools and items for operation, including specific battery and charger models. The guide covers safety precautions, such as operating near spectators and managing electronic speed control (ESC) power sequences.
| Scale | 1/18 |
|---|---|
| Battery Type | 7.2V 3000mAh NiMH |
| Charger Model | Onyx 200 Peak Charger |
| Warranty Period | 90 days |
Always turn on the transmitter before turning on the ESC to prevent damage to the electronics.
Adjust the stability by adding or removing weights in the flywheel; more weight gives more stability, while less weight gives more response.