This manual is intended for administrators and users of the AXIS 292 Network Video Decoder, and is applicable for software release 4.xxx. It includes instructions for installing, using and managing the AXIS 292 on your network.
The manual is intended for administrators and users of the Axis 292 Network Video Decoder, a one‑port device that decodes MPEG‑2, MPEG‑4 and Motion JPEG streams and converts them to analog video and audio signals.
It includes sections on product description, web‑based access, network and HTTPS settings, adding and managing video sources, alarm configuration, maintenance tasks, firmware updates, technical specifications, and troubleshooting.
| Video input | Any Axis network camera or video server |
|---|---|
| Video output | PAL or NTSC |
| Resolution | > 500 TVL (depending on source) |
| Video decoding | Motion JPEG, MPEG‑2 and MPEG‑4 (auto detection) |
| Frame rates | up to 30/25 fps (NTSC/PAL) |
| Bit rate | up to 8 Mbit/s |
| Audio decoding | Stereo and mono; G.711, G.721, G.723, MPEG‑1 Layer‑2 |
| Video sources supported | 128 pre‑configurable sources |
| Network connector | 10Base‑T/100Base‑TX Ethernet (RJ‑45) |
| Power | 7‑20 V DC, min 7 W |
Open a browser, enter the AXIS 292 IP address or host name, and log in with the administrator username and password.
Press the Control button on the front panel; this restores the factory defaults as described on page 17.
It can decode Motion JPEG, MPEG‑2 and MPEG‑4 streams with automatic detection.