TEXAS INSTRUMENTS SN65LVDS32B SN65LVDT32B SN65LVDS3486B SN65LVDT3486B SN65LVDS9637B SN65LVDT9637B Manual

This document describes the features and characteristics of high-speed differential receivers such as SN65LVDT32B, SN65LVDS32B, SN65LVDT3486B, SN65LVDS3486B, SN65LVDT9637B, and SN65LVDS9637B. These products comply with the ANSI EIA/TIA-644 standard, support signaling rates up to 400 Mbps, operate with a single 3.3V supply, have a common-mode input voltage range of -2V to 4.4V, differential input thresholds less than 50 mV with 50 mV of hysteresis over the entire common-mode input voltage range, integrated 110-Ω line termination resistors, propagation delay times of 4 ns (typical), active fail-safe feature ensuring a high-level output with no input, bus-pin ESD protection exceeding 15 kV HBM, inputs remaining high-impedance on power down, recommended maximum parallel rate of 200 M-Transfer/s. These products are available in a small-outline package with 1.27 mm terminal spacing.


TEXAS INSTRUMENTS SN65LVDS32B SN65LVDT32B SN65LVDS3486B SN65LVDT3486B SN65LVDS9637B SN65LVDT9637B Manual - cover page
Brand
Texas Instruments
Category
Other Electronics
Document type
Datasheet
Language
English
Pages
22
File format
PDF
File size
384 KB
Published
09 May, 2012
Updated
28 September, 2023
MD5 checksum
01304303F6C2124E96FAB2376FBCF763

About this manual

The SN65LVDS and SN65LVDT families are high‑speed differential line receivers that operate from a single 3.3 V supply. They meet ANSI/TIA‑644 standards, provide integrated 110 Ω line‑termination, and include a fail‑safe circuit that drives a high‑level output within 600 ns after loss of the input signal.

The devices are offered in small‑outline packages, support a wide common‑mode input range (‑2 V to +5 V), and are rated for operation from –40 °C to 85 °C. Electrical and switching characteristics such as propagation delay, output skew, and ESD protection are detailed in the datasheet.

What's inside

  • Features
  • Description
  • Absolute Maximum Ratings
  • Electrical Characteristics
  • Switching Characteristics
  • Parameter Measurement Information
  • Package Materials Information
  • Important Notice

Specifications

Supply voltage range3.0 V – 3.6 V
Operating temperature range‑40 °C – 85 °C
Integrated line‑termination resistance110 Ω
Propagation delay (low‑to‑high output)2.5 ns – 6 ns
ESD protection (HBM)15 kV

Frequently asked questions

What supply voltage does the SN65LVDS series require?

The devices operate from a single 3.3 V supply with a permissible range of 3.0 V to 3.6 V.

What is the propagation delay of the receiver outputs?

Typical propagation delay is 2.5 ns to 6 ns for both low‑to‑high and high‑to‑low transitions.

How much ESD protection do the devices provide?

The inputs can withstand up to 15 kV human‑body model (HBM) and 600 V machine‑model discharges.

What temperature range can the devices operate in?

They are rated for operation from –40 °C to 85 °C.

Download PDF (384 KB)

More Texas Instruments Manuals


View all Texas Instruments manuals →