This manual mainly introduces the hardware wiring method and installation steps of Argtek wireless router, and explains the LED indicator diagram of the router and the default IP address, subnet mask, login user name and password.
The guide starts with hardware installation, listing the router, a 12 V DC power supply, a high‑gain antenna, PoE adapters and the user manual. It explains how to connect the router to a computer, switch, hub, and ADSL/Cable modem, and describes the LED indicators.
The second part covers the router’s web‑based setup, including accessing the default IP 192.168.1.254, selecting operation mode (Gateway, Bridge, WISP), configuring LAN/WAN settings, wireless basics (SSID, security), and applying changes. Reset procedures and PoE power options are also detailed. This manual is written in Chinese.
| Default IP address | 192.168.1.254 |
|---|---|
| Subnet mask | 255.255.255.0 |
| Power supply | DC 12 V |
| Power over Ethernet | Supported |
| Operation modes | Gateway, Bridge, WISP |
Open a web browser and enter 192.168.1.254 to access the management interface.
Press and hold the Reset button for about 10 seconds, then release it.
Yes, use the LAN Interface Setup screen to modify the router’s IP address.