POWER KING ARGtek ARG-1206 WLAN AP Router For 802.11b/g Wireless Router quick Installation Guide

This document introduces the hardware connection method, configuration settings, and setting modes of the wireless routers produced by ARGtek Communication Inc.

Brand: Power
Category: Router
Document type: Quick Start Guide
Language: Chinese
Pages: 11
File format: PDF
File size: 1.3 MB
Published: 10 March, 2012
Updated: 28 September, 2023
MD5 checksum: 3B40E4164F45FEB4F520DE6D241BCCC3
PDF: POWER KING ARGtek ARG-1206 WLAN AP Router For 802.11b/g Wireless Router quick Installation Guide PDF

About this manual

This guide walks you through the hardware wiring, connecting the power supply, antenna and Ethernet cables, and powering up the ARG-1206 router. It then shows how to access the internal web interface at the default IP address (192.168.1.254) to complete the initial setup.

The document covers configuration of operation mode (Gateway/Bridge/WISP), LAN/WAN settings, wireless basic parameters such as SSID, channel and band, and security options. It also explains how to reset the device, disable DHCP, and adjust TCP/IP settings. This manual is written in Chinese.

What's inside

Hardware Wiring
Internal Web Setup
Operation Mode Selection
LAN Interface Setup
WAN Interface Setup
Wireless Basic Settings
Wireless Security
TCP/IP Settings
Reset Procedure

Specifications

Default IP address	192.168.1.254
Subnet mask	255.255.255.0
Firmware version	142
Wireless band	2.4 GHz
Channel number	11
Encryption status	Disabled
Default SSID	WDS
DHCP	Disabled

Frequently asked questions

What is the default IP address to access the router’s web interface?

The default IP address is 192.168.1.254.

How can the router be reset to factory defaults?

Press the Reset button for about 10 seconds, release it, and wait for the AP to restart.

How can DHCP be disabled on the device?

In the TCP/IP Settings page, select DHCP, choose Disable, and click Apply Changes.

Download PDF (1.3 MB)