Error Codes

Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.

• CodeFaulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C Error 4210: over temperature

  Over temperature condition detected on this Faulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C device. The manual lists no action for this code.

• CodeFaulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C Error 3210: over voltage

  Over voltage condition detected on this Faulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C device. The manual lists no action for this code.

• CodeFaulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C Error 2310: continuous over current

  Continuous over current condition detected on this Faulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C device. The manual lists no action for this code.

• CodeFaulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C Error 2300: current, device output side

  Current output side issue detected on this Faulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C device. The manual lists no action for this code.

• CodeFaulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C Error 1000: generic error

  Generic error occurred on this Faulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C device. The manual lists no action for this code.

• CodeFaulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C Error 0x08: Access not possible due to local application

  Access not possible due to local application on this Faulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C device. The manual lists no action for this code.

• CodeFaulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C Error 0x06: Access to this object is not supported

  Access to this object is not supported on this Faulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C device. The manual lists no action for this code.

• CodeFaulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C Error 0x05: Toggle bit unchanged

  Toggle bit unchanged on this Faulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C device. The manual lists no action for this code.

• Code listFaulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C Error Codes

  All 18 error codes of the Faulhaber 3564K024B CC, MCBL 3003/06 C, MCDC 3003/06 C motion controller with their meaning, causes and what to do, taken from the manufacturer's manual with page references.

• CodePerkins 2806C-E16 Error 323-05: Engine shutdown lamp open circuit

  The engine shutdown lamp is open circuited. The manual lists no action for this code.

• CodePerkins 2806C-E16 Error 323-04: Engine shutdown lamp short to ground

  The engine shutdown lamp is shorted to ground. The manual lists no action for this code.

• CodePerkins 2806C-E16 Error 323-03: Engine shutdown lamp open/short to B+

  The engine shutdown lamp is shorted to B+. The manual lists no action for this code.

• CodePerkins 2806C-E16 Error 286-05: Engine lubricating oil pressure lamp open circuit

  The engine lubricating oil pressure lamp is open circuited. The manual lists no action for this code.

• CodePerkins 2806C-E16 Error 286-04: Engine lubricating oil pressure lamp short to ground

  Engine lubricating oil pressure lamp short to ground means the oil pressure warning lamp circuit is shorted to ground, causing it to fail. The manual lists no action for this code.

• CodePerkins 2806C-E16 Error 286-03: Engine lubricating oil pressure lamp open/short to B+

  Engine lubricating oil pressure lamp open/short to B+ indicates that the oil pressure warning lamp has an electrical fault preventing proper signaling. The manual lists no action for this code.