Error Codes

Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.

• CodePerkins 2806C-E16 Error 41-04: 8 volt Sensor power supply short to ground

  The 8 volt Sensor power supply is shorted to ground on the Perkins 2806C-E16 engine. The manual lists no action for this code.

• CodePerkins 2806C-E16 Error 41-03: 8 volt Sensor power supply open/short to B+

  The 8 volt Sensor power supply is open or shorted to B+ on the Perkins 2806C-E16 engine. The manual lists no action for this code.

• CodePerkins 2806C-E16 Error 6-11: Injector cylinder No. 6 fault

  Injector cylinder No. 6 fault on the Perkins 2806C-E16 engine. The manual lists no action for this code.

• CodePerkins 2806C-E16 Error 5-11: Injector cylinder No. 5 fault

  Injector cylinder No. 5 fault on the Perkins 2806C-E16 engine. The manual lists no action for this code.

• CodePerkins 2806C-E16 Error 4-11: Injector cylinder No. 4 fault

  Injector cylinder No. 4 fault on the Perkins 2806C-E16 engine. The manual lists no action for this code.

• CodePerkins 2806C-E16 Error 3-11: Injector cylinder No. 3 fault

  Injector cylinder No. 3 fault on the Perkins 2806C-E16 engine. The manual lists no action for this code.

• CodePerkins 2806C-E16 Error 2-11: Injector cylinder No. 2 fault

  Injector cylinder No. 2 fault on the Perkins 2806C-E16 engine. The manual lists no action for this code.

• CodePerkins 2806C-E16 Error 1-11: Injector cylinder No. 1 fault

  Injector cylinder No. 1 fault on the Perkins 2806C-E16 engine. The manual lists no action for this code.

• Code listPerkins 2806C-E16 Error Codes

  All 44 error codes of the Perkins 2806C-E16 diesel engine with their meaning, causes and what to do, taken from the manufacturer's manual with page references.

• CodeMerloni Various (e.g., F__7 C/P, FB97, FO87) Error W04: The door doesn't block.

  The door does not block, appearing 10 times every 30 seconds before triggering F09. The manual's first action is: “1. See F09.”

• CodeMerloni Various (e.g., F__7 C/P, FB97, FO87) Error W03: The door doesn't block.

  The door does not block, appearing 10 times every 30 seconds before triggering F08. The manual's first action is: “1. See F08.”

• CodeMerloni Various (e.g., F__7 C/P, FB97, FO87) Error W02: Communication error EEPROM – uC.

  There is a communication error between the microcontroller and EEPROM. The manual's first action is: “1. Substitute the display card.”

• CodeMerloni Various (e.g., F__7 C/P, FB97, FO87) Error W01: Checksum added recipe error.

  A checksum error occurred while starting a recipe. The manual's first action is: “1. Substitute the display card.”

• CodeMerloni Various (e.g., F__7 C/P, FB97, FO87) Error F07: Centre oven temperature too high during the Fast Clean (>525°C).

  The centre oven temperature exceeds 525°C during Fast Clean. The manual's first action is: “1. See F06.”

• CodeMerloni Various (e.g., F__7 C/P, FB97, FO87) Error F06: Centre oven temperature too high during cooking (>325°C).

  The centre oven temperature exceeds 325°C during cooking. The manual's first action is: “1. Verify that the temperature probe is correctly fitted to the posterior part of the oven's cavity and at the terminals J9 and …