Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
The CPU module has exceeded 20,000 write operations to data memory and requires replacement. The manual's first action is: “Replace the CPU module.”
All 41 error codes of the Mitsubishi MELSEC iQ-F Series Mitsubishi MELSEC iQ-F Series with their meaning, causes and what to do, taken from the manufacturer's manual with page references.
IO Board Fault indicates a failure in the input/output board, requiring power cycle and potential drive replacement if unresolved. The manual lists no action for this code.
Parameter Checksum fault indicates corrupted or mismatched parameter data, requiring restoration to factory defaults. The manual lists no action for this code.
Function Loss fault signals an input issue at terminal 01, requiring closure of the input and restart of the drive. The manual lists no action for this code.
Comm Loss fault occurs when a communication link is interrupted, possibly due to wiring, port, or adapter issues. The manual lists no action for this code.
Net Loss fault means the communication network has failed, preventing proper data exchange between devices. The manual lists no action for this code.
Power Unit fault indicates a problem with the drive's internal power system, requiring power cycle or replacement if unresolved. The manual lists no action for this code.
Drive Overload means excessive load or insufficient acceleration time is causing the drive to overload. The manual lists no action for this code.
SW OverCurrent(1) occurs when load requirements exceed the SW Current Trip setting (A098). The manual lists no action for this code.
Params Detaulted means the drive was commanded to write default values to EEPROM and requires clearing the fault or cycling power. The manual lists no action for this code.
Phase VW Short indicates a shorted condition in the motor or drive output terminal wiring. The manual lists no action for this code.
Phase UW Short means there is a shorted condition, requiring replacement if cleared. The manual lists no action for this code.
Phase UV Short indicates a shorted condition in the motor or drive output terminal wiring. The manual lists no action for this code.
Phase W to Gnd means there is a phase-to-ground fault, requiring replacement if cleared. The manual lists no action for this code.