Industrial

The DS2482-800 is an I²C* to 1-Wire� bridge device that interfaces directly to standard (100kHz max) or fast (400kHz max) I²C masters to perform bi-directional protocol conversion between the I²C master and any downstream 1-Wire slave devices.

The PHV 1000-RO is a 400 MHz, standard sized, 100:1 passive probe designed for instruments having 1 MΩ input resistance. This probe is recommended for probing applications in service and development environments and is adjustable for low and high frequencies. It is also recommended for transient measurements up to 6 kV such as EMC testing applications. The probe is rated with 1000 V CAT II maximum input voltage and complies with latest safety standards. The DC fine adjustment enables trimming for preferred voltage ranges. Like every PMK passive probe the PHV 1000-RO features CeramCoreTM technology. The probe's entire core is made of a high quality ceramic hybrid. Pure coaxial design and laser trimmed resistors ensure highest signal fidelity along the signal path offering high bandwidth and fast risetimes for accurate impulse measurements. All passive probes are equipped with PMKs signature spring loaded, needle sharp tips to support precise and safe measurements minimizing the risk of slipping. Various types of tips are available. Besides the spring contact tip there is also a solid tip available at the users choice. Probe tips are interchangeable and can be replaced easily. Basic probe accessories and replacement tips are provided.

The TPS74401 is a low-dropout (LDO) linear regulator that provides an easy-to-use robust power management solution for a wide variety of applications.

lp3996 is a dual low dropout linear regulator with power-on-reset function from national semiconductor company. its maximum output current is 300ma, and output accuracy is 1.5%.

This document is a manual for the PC, DVI, HDMI, and video interface controller for TFT panel. It provides instructions on how to use the controller, system design, assembly notes, connection and operation, connectors and pinouts, controller dimensions, application notes, troubleshooting, specifications, and more.

The document introduces the LTC3713 low input voltage, high power, No RSENSE synchronous buck DC/DC controller. The controller adopts true current mode control, the input voltage can be as low as 1.5V, without 5V auxiliary power supply, using standard 5V logic level N-channel MOSFETs, adjustable current limit, frequency, switch time, duty cycle, reference voltage, output overvoltage protection, etc., suitable for telecom card 3.3V, 2.5V, 1.8V step-down, bus termination (DDR memory, SSTL), synchronous buck with general purpose boost, low VIN synchronous boost and other applications.

This manual is a service manual for Fashion Feature LCD-Monitor Chassis LHA19PS Model 940Fn, which details the product's features, key functions, and usage instructions.

The LM7171 is a high performance high output current voltage controlled amplifier from National. The chip has a very high conversion rate and a wide unit gain bandwidth, providing 4100V/µs conversion rate and 200MHz unit gain bandwidth while consuming only 6.5mA of supply current. The chip is ideal for video and high speed signal processing applications such as HDSL and pulse amplifiers. With 100mA output current, the LM7171 can be used for video distribution, transformer driver or laser diode driver. Operating on ±15V power supplies allows for large signal swings and provides greater dynamic range and signal-to-noise ratio. The LM7171 offers low SFDR and THD, ideal for ADC/DAC systems. In addition, the LM7171 is specified for ±5V operation for portable applications. The LM7171 is built on National's advanced VIP™ III (Vertically integrated PNP) complementary bipolar process.

The MOC3051-M and MOC3052-M consist of a AlGaAs infrared emitting diode optically coupled to a non-zero-crossing silicon bilateral AC switch (triac). These devices isolate low voltage logic from 115 and 240 Vac lines to provide random phase control of high current triacs or thyristors. These devices feature greatly enhanced static dv/dt capability to ensure stable switching perfor- mance of inductive loads.

The LD1086 is a low dropout voltage regulator that can provide up to 1.5A of output current. It has adjustable or fixed output voltage options, including 1.5V, 1.8V, 2.5V, 2.85V, 3.3V, 3.6V, 5V, 8V, 9V, and 12V. The output tolerance is ±1% at 25°C and ±2% over the full temperature range. It features internal power and thermal limit, and operates in a wide temperature range from -40°C to 125°C. The LD1086 is available in TO-220, D2PAK, D2PAK/A, and DPAK packages. It is pin-to-pin compatible with older 3-terminal adjustable regulators but offers better performance in terms of dropout and output tolerance. The LD1086 has a quiescent current that flows into the load, increasing efficiency. Only a minimum 10µF capacitor is required for stability. The document also provides order codes for different models and packages.

VISHAY TSOP312 is a miniaturized receiver for infrared remote control systems. It features a PIN diode and preamplifier assembled on a lead frame, with an epoxy package designed as an IR filter. The receiver supports a 3V supply voltage and is compatible with major transmission codes.

This manual is the service manual of LCT2716, which includes safety instructions, production specifications, circuit diagrams, disassembly instructions, pin descriptions, screen specifications, exploded view diagrams, spare parts list, V-chip password and software upgrade.

This document introduces a connection technology that provides a high quality connection between a terminal and a wire at a relatively low applied cost.

The VISHAY TSOP41 series are miniaturized receivers for infrared remote control systems. They operate with short burst transmission codes and high data rates. The product integrates a photo detector and preamplifier, with an internal filter for PCM frequency and improved shielding against electrical field disturbance. It is compatible with TTL and CMOS, has low power consumption, and high immunity against ambient light.