Industrial

T4 series is ST's SNUBBERLESS™ and LOGIC LEVEL technology, with high switching performance, suitable for AC inductive loads. They are recommended for applications using universal motors, electrovalves.. such as kitchen aid equipments, power tools, dishwashers,. Available in a fully insulated package, the T4.-.W version complies with UL standards (ref. E81734).

The document describes the features and characteristics of the T15M256B model product from TM Technology Inc. The product is a low power CMOS static RAM with high speed access time, low power consumption, and fully static operation. It operates on a single 5V power supply and has low operating and standby current. Data retention is guaranteed at a power supply voltage as low as 1.5V. The product is available in multiple packages and operating temperature ranges.

The SY89228U is a precision, low jitter 1GHz ÷3, ÷5 clock divider with an LVPECL output. A unique Fail-Safe Input (FSI) protection prevents metastable output conditions when the input clock voltage swing drops significantly below 100mV or input is removed. The differential input includes Micrel’s unique, 3-pin internal termination architecture that allows the input to interface to any differential signal (AC- or DC- coupled) as small as 100mV (200mVPP) without any level shifting or termination resistor networks in the signal path. The outputs are 800mV, 100K- compatible LVPECL with fast rise/fall times guaranteed to be less than 270ps. The SY89228U operates from a 2.5V ±5% or 3.3V ±10% supply and is guaranteed over the full industrial temperature range of –40°C to +85°C. The SY89228U is part of Micrel’s high-speed, Precision Edge® product line. All support documentation can be found on Micrel’s web site at: www.micrel.com.

The SY88822V is a high speed current switch for driving a semiconductor laser diode in optical transmission applications. It supports 3.3V or 5V single power supply, up to 155Mbps operation, modulation current up to 30mA, PECL output enable, differential PECL inputs, and a tiny 10-pin (3mm) MSOP package.

This document describes the features and characteristics of the STM1001 reset circuit, including precision monitoring of 3V, 3.3V, and 5V supply voltages, open drain RST output, minimum 140ms reset pulse width, low supply current, etc.

ST7261 is a low speed USB 8-bit MCU with 3 endpoints, ROM memory, LVD, WDG and timer.

ST7263B is an 8-bit microcontroller produced by STMicroelectronics, with low-speed USB, 32KB flash, 512 bytes RAM, 8-bit ADC, WDG, timer, SCI and I²C.

This document provides preliminary information on a new product in development or undergoing evaluation, including ST72104G, ST72215G, ST72216G, and ST72254G 8-bit microcontrollers. These microcontrollers feature single voltage flash memory, ADC, 16-bit timers, SPI, and I2C interfaces.

The product is Huawei MateX2 foldable screen phone, which uses the Kirin 9000E chip, built-in 8GB+256GB/512GB storage, equipped with 6.45-inch outer screen and 7.6-inch inner screen, supports 120Hz refresh rate, and is equipped with a 5000mAh battery, supports 66W wired fast charging and 55W wireless fast charging

This document describes the features and characteristics of the 16 Mbit / 32 Mbit / 64 Mbit (x16) Multi-Purpose Flash Plus models SST39VF1601 / SST39VF3201 / SST39VF6401 and SST39VF1602 / SST39VF3202 / SST39VF6402.

This data sheet provides detailed information on the features and characteristics of the SST31LF041/041A/043/043A Monolithic Flash + SRAM ComboMemory

MC68332 is a 32-bit modular microcontroller manufactured by Motorola. It has high-performance data manipulation capabilities and powerful peripheral subsystems.

SP6661 is a high frequency 200mA charge pump inverter or doubler from Sipex Corporation, which features 92% power efficiency, selectable 120kHz/900kHz oscillator frequency, low output resistance, low voltage battery operation, high output current, low profile solution and 1.5V inverter startup guaranteed. It is ideal for 3.6V lithium ion battery or 5.0V input and is pin-compatible with the high-current upgrade of the ICL7660 and 660 industry standard, with the smallest package available for the 660 industry standard – 8 pin µSOIC.

The SP6651A is a high efficiency 800mA synchronous buck regulator from Sipex Corporation, ideal for portable applications that use a Li-Ion or 3 cell alkaline/NiCD/NiMH input. The SP6651A features a proprietary control loop, 20µA light load quiescent current, and 0.3Ω power switches, providing excellent efficiency across a wide range of output currents. As the input battery supply decreases towards the output voltage the SP6651A seamlessly transitions into 100% duty ratio operation, further extending useful battery life. The SP6651A is protected against overload and short circuit conditions with a precise inductor peak current limit. Other features include programmable under voltage lockout and low battery detection, externally programmed output voltage down to 1.0V, logic level shutdown control, and 140°C over temperature shutdown.