Industrial

The RZ541 Packet Sniffer Kit is the ideal platform for analyzing 802.15.4(TM) and ZigBee wireless networks. Included is the basic edition of the Sensor Network Analyzer software from Daintree Networks which enables visualisation, measurement, and analysis of large networks. The kit contains. - STK541 USB Adapter board - 2.4 GHz Radio Controller Board - USB Cable - Daintree Networks Sensor Network Analyzer CD

This document describes the features and characteristics of the CM6296 series common mode choke/isolation transformer produced by Delevan, including parameters such as leakage inductance, inductance, current rating, and DC resistance.

This document provides information on T-1 Wire Terminal (standard) T-1 Sub-Midget Flange Base, including model, rated voltage, rated current, rated hours, rated life, type, filament, etc.

The document is the CLC415 data sheet, which introduces the features and characteristics of the product, including 160MHz small signal bandwidth, 5mA static current, 70dB channel isolation, 0.03%/0.03° differential gain/phase, 12ns settling to 0.1%, 1500V/µs slew rate, 2.0ns rise and fall time (2Vpp), 70mA output current.

CJF15028/CJF15029 are Silicon planar power transistors, NPN/PNP type, TO-220FP fully isolated plastic package, designed for general purpose amplifier and switching applications.

AT45DCB008, AT45DCB004 and AT45DCB002 are 2.7-volt only SPI compatible serial interface DataFlash® Cards. They are offered in 8-megabyte (64-Mbit), 4-mega- byte (32-Mbit) and 2-megabyte (16-Mbit) densities. These 7-pin cards are form factor compatible to the MultiMediaCard standard leveraging on a wide range of low cost connectors that are commercially available. Additionally, the DataFlash Card is pinout compatible to the SPI version of the MMC card. The small form factor and simple interface make the DataFlash Card ideal for a wide variety of data- and program code-storage applications where a removable storage medium is required. Applications range from voice/audio, text or image storage to soft- ware applications, system upgrades and software patches. For detailed device specifications, please refer to the corresponding DataFlash datasheets: • AT45DCB008 reference AT45DB642 • AT45DCB004 reference AT45DB321B • AT45DCB002 reference AT45DB161B

eBLOCKS TM learn design build EB671SI AVR C pRogRAmming pACk is a kit for learning and developing AVR projects, including E-blocks development boards, C for AVR CD ROM, USB cable, power supply, etc.

This PDF file is an introduction to the CDPH4D19F inductor, including its dimensions, inductance range, rated current, features and characteristics.

The CDC2516 is a 3.3V phase-lock loop clock driver for synchronous DRAM applications. It distributes one clock input to four banks of four outputs, with separate output enable for each output bank. The external feedback pin (FBIN) is used to synchronize the outputs to the clock input. The CDC2516 has integrated series-damping resistors on-chip and does not require an external RC network. It operates at 3.3V VCC and is packaged in a plastic 48-pin thin shrink small-outline package.

This document describes the connection method of ARF62 in the DUN configuration, including the correct connection method and the incorrect connection method.