Industrial

The FS8856 is a low-dropout linear regulator from Fortune Semiconductor Co. It operates in the input voltage range from +2.5V to +6.5V and delivers 550mA output current. The high-accuracy output voltage is preset at an internally trimmed voltage 2.5V or 3.3V. Other output voltages can be mask-optioned from 1.3V to 5.0V with 100mV increment. The FS8856 consists of a 1.25V reference compare amplifier, and a P-channel pass transistor. Other features include short-circuit protection and thermal shutdown protection. The FS8856 devices are available in TO-92, SOT-89 and SOT-223 packages.

The ML4872 is a continuous conduction boost regulator designed for DC to DC conversion in multiple cell battery powered systems. Continuous conduction allows the regulator to maximize output current for a given inductor. The maximum switching frequency can exceed 200kHz, allowing the use of small, low cost inductors. The ML4872 is capable of start-up with input voltages as low as 1.8V and is available in 5V and 3.3V output versions with an output voltage accuracy of ±3%. An integrated synchronous rectifier eliminates the need for an external Schottky diode and provides a lower forward voltage drop, resulting in higher conversion efficiency. In addition, low quiescent battery current and variable frequency operation result in high efficiency even at light loads. The ML4872 requires only one inductor and two capacitors to build a very small regulator circuit capable of achieving conversion efficiencies approaching 90%. The SHDN input allows the user to stop the regulator from switching and powers down the control circuitry.

The FS02.N SURFACE MOUNT SCR is a silicon controlled rectifier produced by Fagor. It has high-performance PNPN technology and is suitable for general-purpose applications that require high gate sensitivity using surface mount technology.

FQB13N06 / FQI13N06 60V N-Channel MOSFET is produced by Fairchild and has low gate charge, low reverse blocking resistance, high switching speed, etc. It is suitable for low voltage applications such as DC/DC converters, power management, etc.

This datasheet provides the characteristics parameters of FNL-U500XXXXSL series LED lamps, including emitting color, epoxy type, die material, wavelength, forward voltage, luminous intensity, luminous flux, viewing angle, peak wavelength, dominant wavelength, etc.

FM27C256 is a 256K Electrically Programmable Read Only Memory manufactured by Fairchild. It has a 90 ns access time and can store large amounts of operating system and application software.

Optoway FL-5300 is a 1550 nm MQW-FP uncooled laser diode module with high reliability, long operation life, and high temperature operation. It is suitable for trunk line and FitL applications.

FJY3014R is an NPN Epitaxial Silicon Transistor produced by Fairchild Semiconductor Corporation. It has switching circuit, inverter, interface circuit, driver circuit features, built-in bias resistor (R1=4.7KΩ, R2=47KΩ), and is a complement to FJY4014R.

FDS3670 is a 100V N-Channel PowerTrench MOSFET from Fairchild Semiconductor Corporation. It features faster switching speed and lower gate charge than other MOSFETs with comparable RDS(ON) specifications.

M15-M50 series multilayer ceramic capacitors, with voltage range of 50, 100 and 200 VDC, capacitance range of 1 pF to 6.8 uF, temperature coefficients of COG (NPO), X7R and Z5U.

The document is about the query result of RS20 suppliers. It contains the features and characteristics of the products from this supplier.

The RRF1-XXX-Y is a telecontrolli FSK superheterodyne data receiver with pre-amplifier front end filter. Typical sensitivity is -90 dBm, typical supply current is 5.5 mA (typ) and range is up to 250 meters with RTF2-XXX transmitter.

FDD03 series DC-DC converter 2-3W single and dual output, with low cost, 4:1, 3:1, 2:1 wide input range, I/O isolation, short circuit protection, high efficiency (up to 73%) and other features.