Industrial

This document introduces the external dimensions, temperature characteristics, packaging style, capacitance range, and features of the MCH21 chip capacitors. The chip capacitors achieve high capacitance through thin and multi-layer technology and have non-polarity and lead-free plating terminals. Depending on the temperature characteristics and capacitance range, this model is suitable for thermal compensation capacitors, high dielectric constant capacitors, and miniature high capacitance capacitors.

The MC54/74HC365 is a high-performance silicon-gate CMOS, identical in pinout to the LS365. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. This device is a high-speed hex buffer with 3-state outputs and two common active-low Output Enables. When either of the enables is high, the buffer outputs are placed into high-impedance states. The HC365 has noninverting outputs.

The MC74AC573/74ACT573 is a high-speed octal latch with buffered common Latch Enable (LE) and buffered common Output Enable (OE) inputs. The MC74AC573/74ACT573 is functionally identical to the MC74AC373/74ACT373 but has inputs and outputs on opposite sides.

MC74LVXT4066 is a bilateral switch/multiplexer/demultiplexer that utilizes silicon-gate CMOS technology to achieve fast propagation delays, low ON resistances, and low OFF-channel leakage current. It controls analog and digital voltages that may vary across the full power-supply range (from VCC to GND).

The MC7900 series of fixed output negative voltage regulators are intended as complements to the popular MC7800 series devices. These negative regulators are available in the same seven–voltage options as the MC7800 devices. In addition, one extra voltage option commonly employed in MECL systems is also available in the negative MC7900 series. Available in fixed output voltage options from –5.0 V to –24 V, these regulators employ current limiting, thermal shutdown, and safe–

This datasheet provides the maximum ratings, test conditions, VRSM, VRRM, VDSM, VDRM, version etc. of MCC 132-08io1 and MCD 132-08io1.

The MC14499 is a 7-segment alphanumeric LED decoder/driver with a serial interface port to provide communication with CMOS microprocessors and microcomputers. This device features NPN output drivers which allow interfacing to common cathode LED displays through external series resistors.

The MC10186 is a device that contains six high-speed master-slave type D flip-flops. It has a common clock input, and data is entered into the master flip-flop when the clock is low. The transfer of data from the master to the slave flip-flops occurs on the positive-going clock transition. Therefore, outputs can only change on a positive-going clock transition. Due to the master-slave construction of this device, a change in the information present at the data input will not affect the output information at any other time. This circuit includes a common reset function that is only active when the clock is low.

The MC100EP16VC is a differential receiver/driver with high gain and enable output. It is functionally equivalent to the EP16 and LVEP16 devices. The MC100EP16VC provides an EN input that is synchronized with the data input (D) signal, allowing glitchless gating of the QHG and QHG outputs. When the EN signal is low, the input is passed to the outputs and the data output equals the data input. When the data input is high and EN goes high, it forces QHG low and QHG high on the next negative transition of the data input. If the data input is low when EN goes high, the next data transition to high is ignored and QHG remains low and QHG remains high. The next positive transition of the data input is not passed on to the data outputs under these conditions. The QHG and QHG outputs remain in their disabled state as long as the EN input is held high. The EN input has no influence on the Q output, and the data input is passed on (inverted) to this output whether EN is high or low. This configuration is ideal for crystal oscillator applications where the oscillator can be free running and gated on and off synchronously without adding extra counts to the output.

This document is about the specifications of MBRF 1630CT 1640CT 1650CT 1660CT 1680CT 16100CT 16150CT , the main parameters include maximum recurrent peak reverse voltage, maximum AC voltage, maximum DC blocking voltage, maximum average DC current, peak forward surge current, maximum DC reverse current, typical junction capacitance and typical thermal resistance.

This datasheet introduces the features and characteristics of MBM29PL3200TE/BE, including package, maximum random address access time, maximum page address access time, maximum CE access time, maximum OE access time, etc.